Alumina Wear Resistant Mosaic Lining Sheet
video

Alumina Wear Resistant Mosaic Lining Sheet

Product name :Alumina Wear Resistant Mosaic Lining Sheet
Al2O3 :92% 95%
Bending strength(MPa) : >=220 250 300 400 800
Compressive strength(MPa) : >=1050 1300 1600 2000
Fracture toughness (MPam1/2) : >=3.7 3.8 4.0 4.5 7
Rockwell hardness (HRA): >=82 85 88 90
Loss bulk(cm3): <=0.25 0.2 0.15 0.05 0.02
Bulk density(g/cm3) : >=3.6 3.65 3.7 4.1 5.9
Feature:high temperature resistance, impact resistance, corrosio resistance.
Send Inquiry
Product Introduction
 

Product Introduction

 

 

The wear-resistant ceramic lining is made of alumina or zirconia calcined at high temperature. Alumina is transformed into dense alpha alumina under high temperature environment. Due to the special crystal structure, it becomes extremely hard, and its hardness is second only to diamond. The wear resistance is several times or even more than that of other wear-resistant materials. In addition, due to the smooth surface of the wear-resistant ceramic lining, the surface resistance is very small, which is also an important reason for greatly improving its wear resistance.

Product specifications: thickness 1.5mm-120mm, the size can be customized according to customer needs

Structural shape: sheet, block, hexagonal, square, rectangular, trapezoidal, curved, dovetail, U-shaped, ring and other heterogeneous structures.

 

 

Advantage

 

 

 

1. The Rockwell hardness of high hardness is hra80-90, which is next to diamond in hardness and far exceeds the wear resistance of wear-resistant steel and stainless steel.

2. Its wear resistance is 266 times of manganese steel and 171.5 times of high chromium cast iron. According to our more than ten years of customer tracking survey, under the same working condition, the service life of the equipment can be extended at least ten times.

3. Ceramic tiles sheet density is 3.6g/cm3, only half of that of steel, which can greatly reduce the equipment load.

4. The ceramic pieces with strong adhesion and good heat resistance are pasted on the inner wall of the equipment with heat-resistant strong adhesive. Alumina Wear Resistant Mosaic Lining Sheet can run at 350 ℃ for a long time without aging, and the inorganic adhesive used for adhesive products has a temperature resistance of 750 ℃.The performance indexes of temperature resistance and adhesive force of adhesives are far ahead in China.

 

 

Chemical Composition and Physical Properties

 

 

 

Series BM92 BMG95
AL2O3(%) 92±0.5 95±0.5
Bending strength(Mpa) ≥220 ≥250
Compressive strength(Mpa) ≥1050 ≥1300
Fracture toughness       (MPam1/2) ≥3.70 ≥3.80
Rockwell hardness(HRA) ≥82 ≥85

Wear volume(cm3)

≤0.25 ≤0.2
Bulk density(g/cm3) ≥3.6 ≥3.65

 

 

Service life of alumina wear-resistant ceramic tiles sheet

 

 

 

In addition to the quality of wear-resistant ceramic tiles sheets, one of the important factors is external factors, which mainly include medium particle size, hardness, friction mode, environment, load, and erosion. Speed, temperature and time etc. Generally speaking, the smaller the particles, the lower the concentration, the lower the scouring speed, the smaller the scouring angle, and the longer the service life of the wear-resistant ceramic sheet. Usually, in the network pipe of the slag micro-powder production line, the specific surface area of the micro-powder is 420-450m2/kg, the concentration is 350g/Nm3, the speed is 28-30m/s, and the scouring angle is 30°C, the 20mm wear-resistant ceramic sheet can be used 8 to 10 years. Raw material mill and clinker mill grind materials easier than slag, and wear-resistant ceramic sheets with the same thickness can also have a service life of more than 10 years.

 

 

Application

 

 

 

Alumina Wear Resistant Mosaic Lining Sheet usually used in coal transportation of thermal power, iron and steel, smelting, machinery, mining, chemical industry, cement, port and wharf, etc. All wear-resistant materials on mechanical equipment with large abrasion, such as material conveying system, pulverizing system, ash discharge and dust removal system.

 

 

Picture

 

 

 

IMG_3727

 

 

What else we have ?

 

 

 

20230113151348e0722fac46094b658bd8dd331642d66c

 

 

The production process

 

 

 

tiles

 

FAQ

 

 

Q: What is your terms of delivery?

A: FOB,CFR, CIF

Q: How can I get a quick quotation?

A: Please kindly send us more details about your requirements.

Q: How long is your delivery time?

A: 7-20days working days after all information is confirmed (according to different products).

Q: Do you inspect the finished products?

A: Yes, each step of production and finished products will be came out inspection by QC department before shipping.

Q: What services can we provide?

A: Accept customized according to your requirements. No strict require on the MOQ, accept small order.

Q: Can I get best price from you?

A: Of course. We don't chase excessive profits and always try to give best offer. if you are good at bargaining. you can also enjoy fun of bargaining. Just don't make it too hard!

Q: Are you a manufacturer?

A:    Yes, we are. We have own factory, receive custom-made.

 

 

Hot Tags: alumina wear resistant mosaic lining sheet, manufacturers, suppliers, factory, price, made in China, square ceramic, Alumina Wear Resistant Ceramic Lining Cube, alumina ceramic grinding column, Hexagonal Ceramic Lining Sheet, Circular Wear Resistant Ceramic Lining Sheet, Wear Resistant Ceramic Lining Cube

Send Inquiry

whatsapp

Phone

E-mail

Inquiry