Industrial Ceramic Liner
Industrial Ceramic Liner
Industrial Ceramic Liner
Industrial Ceramic Liner
Industrial Ceramic Liner
Industrial Ceramic Liner

Industrial Ceramic Liner

Product name:Industrial ceramic liner
Al2O3 ： 92% 95%
Bulk density(g/cm3) ： ≥3.6 3.65
Advantage: 1.It has obvious advantages such as high hardness, good wear resistance, strong impact resistance, light weight and good stability.
2.Simple installation, low cost, and saving maintenance time.
3.It has good electrical conductivity, mechanical strength and high temperature resistance, far exceeding the wear resistance of wear-resistant steel and stainless steel.

Send Inquiry

Product Introduction

Details

Industrial ceramic liner is a new type of special corundum ceramic made of Al2O3 as the main raw material, rare metal oxide as the solvent, sintered at a high temperature of 1650 ° C, and bonded with an inorganic special binder.

The regular shape of alumina ceramic tiles is flat plate, orifice welding plate, slotted plate , mutual pressure plate, dovetail groove, trapezoidal plate, curved plate, inner and outer arc plate, big and small head plate, special imported alumina powder ceramic lining plate for cyclone.

High alumina ceramic tiles has the characteristics of wear resistance, impact resistance, corrosion resistance, high temperature resistance and convenient construction.

Why choose it industrial ceramic liner?

1 Alumina ceramic liner is a kind of wear-resistant material, which can maintain high wear resistance under high pressure, high speed and high temperature environment, and is suitable for various mechanical equipment and occasions with large abrasive particles.

2 Industrial ceramic liner has impact resistance, can resist various impacts and vibrations, and is suitable for occasions with severe vibrations, impacts and erosion.

3. The wear-resistant alumina ceramic liner has corrosion resistance and can resist the erosion of various acids, alkalis, salts and other corrosive gases, and is suitable for chemical, metallurgical and other industrial fields.

4. The wear-resistant alumina ceramic lining plate has high temperature resistance, can maintain its original physical and chemical properties in high temperature environments, and is suitable for high temperature and high pressure environments. Compared with some metal materials, it is not easy to deform and break under high temperature environment, and has a longer service life.

5. It is light in weight and easy to construct. Due to its light weight, it is more convenient during construction, which can greatly reduce construction time and cost. It can be cut and installed according to needs, adapting to different occasions and environments.

Specifications

Index	BM92	BMG95	BME95	BMZTA	BMZR
AL2O3 (%)	92±0.5	95±0.5	95±0.5	≥75	-
ZrO2 (%)	-	-	-	≥21	94.8±0.5
Density(g/cm3)	≥3.6	≥3.65	≥3.7	≥4.1	≥5.9
Compressive strength (MPa)	≥1050	≥1300	≥1600	≥2000	-
Bending strength (MPa)	≥220	≥250	≥300	≥400	≥800
Fracture toughness (MPam1/2)	≥3.70	≥3.80	≥4.0	≥4.5	≥7
Rockwell hardness (HRA)	≥82	≥85	≥88	≥90	≥88
Loss bulk (cm3)	≤0.25	≤0.2	≤0.15	≤0.05	≤0.02

Application

Industrial ceramic liner is an ideal material for wear resistance on the surface of conveying equipment for materials (such as ash, coal powder, mineral concentrate powder, tailings, cement, etc.) in industries such as electric power, metallurgy, coal, petroleum, cement, chemical industry, machinery, etc. It is very safe and reliable to use in the occasion of high temperature corrosion.

Picture