Wear Resistant Ceramic Lining with Buckle

Wear Resistant Ceramic Lining With Buckle
Wear Resistant Ceramic Lining with Buckle
Wear Resistant Ceramic Lining with Buckle
Wear Resistant Ceramic Lining with Buckle
Wear Resistant Ceramic Lining with Buckle
Wear Resistant Ceramic Lining with Buckle

Wear Resistant Ceramic Lining with Buckle

Product name:Wear Resistant Ceramic Lining with Buckle
Al2O3 ：92%/95%
Bending strength(MPa) ： >=220/250/300
Compressive strength(MPa) ： >=1050/1300/1600
Fracture toughness (MPam1/2) ： >= 3.8
Rockwell hardness (HRA)：>=82/85/88
Loss bulk(cm3)：<=0.2
Bulk density(g/cm3) ：>=3.6/3.65/3.7
Feature：high temperature resistance, wear resistance.

Send Inquiry

Download

Product Introduction

Details

There are unloading chute equipment used in the industry. The material falls from the chute and is conveyed. The impact force of the material on the chute is relatively large, resulting in serious wear of the chute. In the past, manganese steel liners were generally used as anti-wear, but the effect is not great, and the wear is still serious, and it will need to be replaced soon, which will increase the cost and affect the efficiency of the factory. It needs to be replaced by a more wear-resistant material, which requires higher wear resistance, and alumina wear-resistant ceramics just meet this condition.

In order to solve the problem of ceramic sheet falling off caused by the decrease of ceramic adhesiveness in high temperature environment, a Wear Resistant Ceramic Lining with Buckle is developed, and the welding method is mainly stud welding and spot welding. The welded wear-resistant ceramic brick will increase The toughened ultra-thick wear-resistant ceramics are welded to the inner wall of the steel pipe through advanced stud welding and spot welding processes to form a strong anti-wear layer with a maximum temperature resistance of 500°C.

Feature

1.Wear Resistant Ceramic Lining with Buckle make the connection between ceramic sheets and steel pipes stronger, and the ceramic sheets are also embedded in each other, with tight connections and small gaps, and excellent wear resistance.

2.The welded wear-resistant ceramic tile has excellent temperature resistance. The ceramic sheet is firmly connected to the steel pipe and is not easy to fall off. It can be used according to the working environment.

Chemical Composition and Physical Properties

Series	BM92	BMG95	BME95
AL2O3(%)	92±0.5	95±0.5	95±0.5
Bending strength (Mpa)	≥220	≥250	≥300
Compressive strength (Mpa)	≥1050	≥1300	≥1600
Fracture toughness (MPam1/2)	≥3.70	≥3.80	≥4.0
Rockwell hardness (HRA)	≥82	≥85	≥88
Wear volume (cm3)	≤0.25	≤0.2	≤0.15
Bulk density (g/cm3)	≥3.6	≥3.65	≥3.7

Specification Available

Type	Length(mm)	Width(mm)	Height(mm)
Linging with buckle	50~150	30~100	10~50

Application

The Wear Resistant Ceramic Lining with Buckle is double-fixed by iron plate and ceramic glue, and can work in the environment below 700°C for a long time. It is suitable for the hopper, silo, chute of the iron and steel plant, the chute of the coking plant, the cement plant and the coal discharge bin of the thermal power plant, etc. wear protection.

Picture