Ceramic Rubber Wear Liner
Advantage:1. Anti-impact, with good buffering performance, can effectively cushion the impact brought by falling ore from high altitude.
2.Construction is convenient, no gap after the lining board installation.Rubber composite liner can be twisted, cut, suitable for the installation of various special-shaped equipment.
3. Non-stick material and non-blocking material: due to the high strength and corrosion resistance of ceramics, the equipment can effectively solve the phenomenon of sticking material.Traditional nylon board often touch material, affect work efficiency.
4. Wear-resisting ceramic rubber composite plate density is lower than the steel plate, light weight, easy to replace.
Product Introduction
92% and 95% Alumina Rubber Ceramic Composite Wear Plate is a high-performance lining material manufactured through a controlled heat vulcanization process. The ceramic elements are firmly bonded to a resilient rubber base, creating a durable protective layer for equipment exposed to severe wear.
The composite structure combines the exceptional hardness and abrasion resistance of alumina ceramics with the flexibility and impact-absorbing properties of rubber. The ceramic layer withstands continuous friction and material impact, while the rubber backing helps absorb vibration and shock. It also provides effective corrosion protection and reduces operating noise, making the liner suitable for demanding material-handling applications.
Common specifications
250 x 250mm, 300 x 300mm, 250 x 00mm, 500 x 500mm, etc.
Ceramic thickness: 4---50mm
Rubber thickness: 5---20mm
Steel plate thickness: 4---8mm
Advantage
The ceramic rubber composite liner is engineered to provide both strong abrasion protection and effective impact absorption. The hard ceramic layer withstands continuous friction and material impact, while the flexible rubber backing absorbs shock and vibration, making it suitable for handling and conveying abrasive bulk materials.
The rubber component also helps improve resistance to wear and corrosion, while reducing vibration and operational noise caused by material impact or accumulation. This can help minimize unexpected maintenance and production interruptions.
For different equipment structures, wear-resistant ceramic tiles can be firmly bonded to specially formulated rubber and mounted onto steel plates using countersunk bolts. The liner can be manufactured in various shapes and configurations, allowing easier installation, removal, and replacement while providing reliable protection for high-wear areas.
Chemical composition and physical properties
| Item | Rubber |
| Bulk density(g/cm3) | 1.4 |
| Tensile strength at break (Mpa) | ≥14 |
| Elongation at break (%) | ≥250 |
| Shore hardness(HA) | 48~65 |
| Adhesive between rubber & steel (Mpa) | ≥3.5 |
| Adhesive between rubber & ceramic (Mpa) | ≥3.5 |
|
Thermal conductivity (normal temperature) (W/M·k) |
2 |
| Aging period (years) | ≥1.5 |
| Series | BM92 | BMG95 |
| AL2O3(%) | 92±0.5 | 95±0.5 |
| Bending strength(Mpa) | ≥220 | ≥250 |
| Compressive strength(Mpa) | ≥1050 | ≥1300 |
| Fracture toughness (Mpam1/2) | ≥3.70 | ≥3.80 |
| Rockwell hardness(HRA) | ≥82 | ≥85 |
| Wear volume(g/cm3) | ≤0.5 | ≤0.2 |
| Bulk density(g/cm3) | ≥3.6 | ≥3.65 |
Application
Ceramic Rubber Wear Liner are widely used in the coal conveying and ash discharge systems of thermal power plants and the conveying, batching silos, hoppers, mixers, pelletizing discs and other equipment in the metallurgical and steel industry, effectively solving the problem of large material drop and strong impact , the material is bonded, which leads to the problem of low service life of the ingredient conveying system; at the same time, the ceramic rubber composite liner can be twisted and cut, and is suitable for the installation of various special-shaped equipment.
Picture


The contruction case


FAQ

01.Are you manufacturer?
02.Do you have stock?
03.What certificates and documents do you offer?
04.Why we could choose you?
Powerful technical support-come from our highly skilled & fully experienced staff, work.ing in chemical industry for over 20 years, in average.
Strict quality control-comes form oursophisticated management system.
Professional and warm sales team-since we believe wecan only win via our hard work in a competitive world.
Quick response and excellent presale and after sale service-since we believe our custom-ers deserve all the best service.
05.Can I get best price from you?
06.How should I pay?
Hot Tags: ceramic rubber wear liner, manufacturers, suppliers, factory, price, made in China, Wear Resistant Ceramic Bricks, Steel Wear Resistant Plate, Wear resistant Rubber ceramic Composite Plate, Wear Resistant Alumina Ceramic Pipe Elbow, Abrasion Resistance Ovelay Plate, Silicon Carbide Ceramic Rubber Composite Plate
You Might Also Like
Send Inquiry
















