Ceramic Wear Plates With Pasting And Welding
Product introduction:
The main component of ceramic wear plates is high-purity alumina. Alumina is the most widely used ceramic material due to its excellent performance and good cost performance.Titan ceramic wear plates are widely used in the conditions that need wear protection and pressure resistance protection. Because of its insulation performance, it also can be used in electronic industry.
Product features:
high hardness
super wear resistance
super corrosion resistance
good insulation perform
Application:
Ceramic wear plates are suitable for anti-wear of material conveying equipment, chute, hopper, etc. in thermal power, steel, cement, coal, mining, chemical industry etc.
Specification Available:
| Size | Length | Width | Height |
| Flat plate(without hole) | 50-150 | 25-100 | 6-50 |
| Flat plate(with hole) | 50-150 | 30-100 | 10-50 |
| Trapezoidal plate | 50-150 | 20-100 | 8-50 |
Chemical composition and physical prperties:
| Series | BM92 | BMG95 | BME95 | BMZTA | BMZR |
| AL2O3(%) | 92±0.5 | 95±0.5 | 95±0.5 | ≥75 | - |
| ZrO2(%) | - | - | - | ≥21 | 94.8±0.5 |
| Bending strength(Mpa) | ≥220 | ≥250 | ≥300 | ≥400 | ≥800 |
| Compressive strength(Mpa) | ≥1050 | ≥1300 | ≥1600 | ≥2000 | - |
| Fracture toughness(MPam1/2) | ≥3.70 | ≥3.80 | ≥4.0 | ≥4.5 | ≥7 |
| Rockwell hardness(HRA) | ≥82 | ≥85 | ≥88 | ≥90 | ≥88 |
| Wear volume(cm3) | ≤0.25 | ≤0.2 | ≤0.15 | ≤0.05 | ≤0.02 |
| Bulk density(g/cm3) | ≥3.6 | ≥3.65 | ≥3.7 | ≥4.1 | ≥5.9 |
Picture
Hot Tags: ceramic wear plates with pasting and welding, manufacturers, suppliers, factory, price, made in China, chute liner material, Rubber Ceramic Wear Liner, blast furnace lining, High Impact Resistance Ceramic Liner, Square Ceramic Welding Liner, ball mill lining
Previous
Alumina Ceramic PlatesNext
Ceramic LinersYou Might Also Like
Send Inquiry