Alumina Ceramic Tiles For Wear
Product Material:alumina ceramic
Product Color:white
Certificate: ISO9001
Customized: available
Product Packaging: carton /as requirements
Al2O3 92% 95%
Bending strength(MPa) >=220 250 300 400 800
Compressive strength(MPa) >=1050 1300 1600 2000
Fracture toughness (MPam1/2) >=3.7 3.8 4.0 4.5 7
Rockwell hardness (HRA) >=82 85 88 90
Loss bulk(cm3) <=0.25 0.2 0.15 0.05 0.02
Bulk density(g/cm3) >=3.6 3.65 3.7 4.1 5.9
Product introduction

TITAN Alumina Wear Tiles provide a durable protective surface for equipment exposed to continuous abrasion. Manufactured from high-alumina ceramic, they offer excellent hardness, low wear volume and flexible installation options. Different grades, thicknesses and shapes are available to suit industrial equipment and operating conditions.The Alumina ceramic tiles for wear is mainly made of alumina or zirconia .The alumina ceramic lining plate is further divided into 92 alumina wear-resistant ceramics and 95 alumina wear-resistant ceramics, of which the density of 92 alumina is 3.6 and the Mohs hardness is 9. The density of the 95 alumina ceramic liner is about 3.65, and the hardness is 9 too.
Product Overview
Alumina Ceramic Tiles for Wear are high-performance ceramic lining components made primarily from aluminum oxide (Al₂O₃). They are installed on equipment surfaces that experience continuous friction from abrasive materials, helping protect the underlying steel structure and reduce wear-related maintenance.
Unlike conventional metal liners, alumina ceramic tiles combine high surface hardness with relatively low material wear. They are commonly used in material handling and processing systems where coal, minerals, cement raw materials and other abrasive substances move through equipment at high speed.
TITAN provides different ceramic grades and tile designs to match various installation requirements, from flat surfaces to curved or specially shaped areas.

Feature

1. High Hardness for Abrasion Protection
The 92% and 95% alumina grades have a Mohs hardness of approximately 9. This makes them suitable for equipment exposed to sliding friction and repeated contact with hard particles. The ceramic layer takes the direct wear, helping preserve the equipment body and reduce the frequency of liner replacement.
2. Low Wear Volume
TITAN's published specifications list wear volume values of ≤0.25 cm³ for BM92, ≤0.20 cm³ for BMG95 and ≤0.15 cm³ for BME95. These figures provide buyers with a reference when comparing material grades. Lower wear volume can help extend the replacement interval under suitable operating conditions.
3. Mechanical Strength for Industrial Use
The ceramic grades have different bending and compressive strength levels. For example, BM92 has a listed bending strength of at least 220 MPa and compressive strength of at least 1050 MPa. BME95 reaches at least 300 MPa in bending strength and 1600 MPa in compressive strength. These properties help the tiles withstand mechanical loads during service and installation.
4. Multiple Shapes for Easier Installation
Flat, weldable and trapezoidal designs are available. Different geometries allow the lining layout to follow equipment dimensions and surface structures. Smaller or specially shaped pieces can be considered for areas where standard rectangular tiles are difficult to fit.
5. Chemical and Temperature Resistance
Alumina ceramic offers resistance to many corrosive substances and can perform in demanding industrial environments. Its suitability depends on the actual chemical medium, operating temperature and installation system. The adhesive or fixing method should be selected according to the working conditions.
Product application
Alumina ceramic tile is widely used in power plants and metallurgical plants, mainly as wear-resistant materials for the inner walls of various industrial equipment.
Mining and Mineral Processing: Protecting chutes, hoppers, separators and transfer points handling ores and mineral particles.
Cement Plants: Lining material conveyors, silos, raw material handling equipment and other areas exposed to abrasive cement materials.
Power Generation: Protecting coal handling systems, coal bunkers, ash handling equipment and related conveying components.
Steel and Metallurgy: Reducing wear in material transfer equipment that handles coke, ores and other bulk materials.
Chemical and Powder Processing: Providing a hard protective surface for equipment transporting abrasive powders and granules.

Chemical Composition and Physical Properties
| Series | BM92 | BMG95 | BME95 | BMZTA | BMZR |
| AL2O3(%) | 92±0.5 | 95±0.5 | 95±0.5 | ≥75 | - |
| ZrO2(%) | - | - | - | ≥21 | 94.8±0.5 |
|
Bending strength (Mpa) |
≥220 | ≥250 | ≥300 | ≥400 | ≥800 |
| Compressive strength (Mpa) | ≥1050 | ≥1300 | ≥1600 | ≥2000 | - |
|
Fracture toughness (MPam1/2) |
≥3.70 | ≥3.80 | ≥4.0 | ≥4.5 | ≥7 |
|
Rockwell hardness (HRA) |
≥82 | ≥85 | ≥88 | ≥90 | ≥88 |
| Wear volume(cm3) | ≤0.25 | ≤0.2 | ≤0.15 | ≤0.05 | ≤0.02 |
| Bulk density (g/cm3) | ≥3.6 | ≥3.65 | ≥3.7 | ≥4.1 | ≥5.9 |
Specification Available
| Type | Length(mm) | Width(mm) | Height(mm) |
| Flat tile | 50~150 | 25~100 | 6~50 |
| Weldable tile | 50~150 | 30~100 | 10~50 |
| Trapezoidal tile | 50~150 | 20~100 |
8~50 |
Our ceramic tiles

Production process

FAQ
01.What alumina content is available for TITAN wear tiles?
02.What is the hardness of alumina ceramic tiles?
03.Can the ceramic tiles be customized?
04.What is the difference between flat, weldable and trapezoidal tiles?
05.Are alumina tiles suitable for high-impact applications?
06.What information is needed for a quotation?
Is your equipment experiencing frequent wear, liner damage or unplanned maintenance?
Send TITAN your equipment drawings, required tile dimensions, material type and operating conditions. We can help evaluate the suitable alumina grade, thickness and tile design for your project.
Contact TITAN today for technical support and a quotation for customized Alumina Wear Tiles.
Hot Tags: alumina ceramic tiles for wear, manufacturers, suppliers, factory, price, made in China, square ceramic, wear resistant ceramic lining, square alumina ceramic lining sheet, Hexagon Alumina Ceramic Lining Sheet Mosaic, Circular Wear Resistant Ceramic Lining Sheet, alumina ceramic block
You Might Also Like
Send Inquiry
















