The wear-resistant ceramic lining plate is generally made according to the mold during production, and the shape of the wear-resistant ceramic plate is relatively regular, so it needs to be cut during the construction process.
However, the cutting of wear-resistant ceramic liners is difficult, because the hardness of wear-resistant ceramic liners is high, and the Rockwell hardness of wear-resistant ceramic liners with an alumina content of more than 92% is above 80, and the hardness of general grinding wheels is not as high as it is. Can not be cut, can only be cut with a diamond saw blade.
We use high hardness diamond blades for cutting. There are both large desktop and hand-held cutting machines, as long as they are protected when cutting, and the skin will not be cut by the cut pieces.
How to cut wear resistant ceramic liner? Many friends encountered difficulties in this place, and everything was broken on the wear-resistant ceramic lining.
Please pay attention to the position of the lower knife. The technician told us that when the high-speed rotating blade contacts the wear-resistant ceramic plate at the center position, the ceramic plate will be broken under the action of shear stress.
Therefore, the knife must be cut from the end, so that the stress can be reduced to a small extent and will not affect the cutting of the wear-resistant ceramic plate.
Then it is necessary to pay attention to the cooling of the cutting blade. When cutting this hard material, the temperature of the blade rises rapidly, which will cause the strength of the blade to decrease, so pay attention to cooling the blade with water.





