The development history of wear-resistant ceramics
Alumina ceramic material has the advantages of high hardness, high temperature resistance, corrosion resistance, wear resistance and other incomparable advantages of metal materials. It has a wide variety of raw materials and low prices, which is unmatched by other ceramic materials such as silicon carbide, silicon nitride, and zirconia. It has very attractive application prospects in aerospace, aviation, engine wear parts, tools and other fields, and is the key technology and preferred material in aerospace, aerospace energy, metallurgy and other fields. However, the chemical bonds of Al2O3 ceramic materials are ionic bonds. It has strong directionality and high energy saving, making plastic deformation difficult, brittle and crack sensitive. The brittleness of alumina ceramic materials greatly limits the popularization and application of this material.
Therefore, certain measures must be taken to refine the microstructure of ceramic crystals as much as possible, the most important of which is to refine the grains as much as possible, which will greatly improve the fracture toughness of ceramic materials. Ceramic is a brittle material, most of which fracture occurs at grain boundaries. When the grain size is small, grain boundaries account for a large proportion. When fractured along grain boundaries, the crack propagation path becomes tortuous. The finer the grain, the longer the path, the greater the energy required, and the higher the fracture toughness. In addition, the initial size of defects (cracks) in the sintered body is the same as the grain size. When the grains are refined, the initial size of the defect (crack) is correspondingly smaller and its fracture toughness value is higher. It can be seen that the grain size has a great influence on the fracture toughness. We should increase density while maintaining fine-grainedness. Fine crystallization is the key to ensure the fracture toughness of ceramic materials.
After basic understanding of the mechanism of strength and toughness of Al2O3 materials, in order to reduce the brittleness of Al2O3-based ceramic materials, in addition to using advanced preparation technology, a variety of toughening methods were also studied. Using SiC whisker toughening, fiber toughening, ZrO2 phase transformation toughening, particle dispersion toughening and nanomaterials can achieve good toughening effect, but there are different degrees of defects, whisker compatibilization is difficult to solve the toxicity of whiskers and its uniform distribution in the matrix; when the whisker material is too high, the densification of the ceramic material will become difficult. In order to achieve a good fiber toughening effect, the fibers must be fully impregnated in the matrix and uniformly distributed, but this is difficult to achieve in the process, and the quality of fiber toughening is difficult to control. ZrO2 produces martensitic transformation toughening under the action of stress, and its toughening effect decreases sharply with the increase of temperature. The toughening effect of the particles is closely related to the bonding strength between the Al2O3 phase interfaces, but the result of particle toughening often reduces the hardness and strength of the ceramic material, resulting in a decrease in the dielectric stability and thermal stability of the material. The effect is very limited.
Nano ZrO2 (3Y) precursor can effectively prevent the abnormal growth of Al2O3 grains and obtain ceramic materials with fine grains. The improvement of fracture toughness comes from the increase of density, grain refinement and toughening of nano-ZrO2 residual stress field.

This is a process of continuous research and development; and creation, which forms the wear-resistant ceramic products commonly used in today's market.





