Wear-resistant alumina liner has the following characteristics:
1) High hardness and high strength
2)Good wear resistance and long service life
3)Easy to install, can install various shapes of equipment
4).Wide range of use and strong adaptability
Equipment available for wear-resistant ceramic liners
1). Coal conveying system: it can be used for air lock, raw coal bunker, coal drop bucket, coal drop pipe, and drum lagging
2). Powder system: medium speed coal mill cylinder, separator outlet pipe, filling elbow, separator inner cone, guide vane, etc.
3). Desulfurization system: can be used in limestone pipelines
4). Powder feeding system: dust removal shell, dust removal impeller coal dust pipe, thermometer protection sleeve, coal dust mixer, throttling shrinkage hole, etc
5). Dust removal system: can be used for air preheater support rod, preheater baffle, preheater pipe wall, induced draft fan shell, flue pipe wall and other equipment
6). Injection system: it can be used in the cone body equipment of the pulverized coal concentrator and the pulverized coal concentration and dilution separator equipment
7). Grease discharge system: ash discharge pipe, dry ash fan casing, fan impeller, valve and cylinder wall, slag pipeline
8). Steel ball coal mill: It can be used for coal mill outlet pipe equipment, sawdust separator, coarse and fine powder separator equipment, powder return pipe and other equipment for the best dispersive grinding effect. If the filling rate of the grinding beads is too high, it is very easy to cause the internal temperature of the sand mill to rise. The filling rate of the grinding beads is too low, the grinding efficiency is low, and the dielectric loss is large. Therefore, the effective filling rate is one of the key factors to improve the grinding efficiency of zirconia beads.






