Conditions that may be encountered during the construction of wear-resistant ceramic linings：
These tasks seem simple, but they are more difficult to implement. This is a time-consuming job that requires careful and experienced, and is not something that can be done by a makeshift team. Unfortunately, some users attach great importance to the choice of wear-resistant ceramic lining and viscose, but ignore the control of wear-resistant ceramic lining construction.
In order to save costs, some manufacturers often set up temporary construction teams in the local area. These temporarily formed teams are difficult to control in terms of operation skills and sense of responsibility, resulting in the rapid fall off of the expensive wear-resistant ceramic lining, which fails to achieve the expected anti-wear effect.
Reasons for the wear-resistant ceramic lining to fall off during use:
Before the wear-resistant ceramic lining is adhered to the surface of the steel parts, the steel parts are not well treated.Some are not completely rust removed, and some are not smooth on the surface. In order to obtain a good construction effect, the steel parts must be pretreated by sandblasting. It is also necessary to wipe the steel surface with acetone to achieve a certain degreasing and degumming effect.
The ratio of wear-resistant ceramic glue is wrong.Different glues have different ratios, it must be strictly controlled, and the ratio of inappropriate can not reach the predetermined viscosity.
The wear-resistant ceramic glue is not evenly spread, so the places where there is no glue or too little glue are easy to fall off. After the wear-resistant ceramic sheet is constructed, it should be gently tapped with a rubber hammer, and the construction surface should be flat.
The wear-resistant ceramic lining must be clear about the working temperature before construction. The wear-resistant ceramic lining can withstand a high temperature of 1,000 degrees. Different temperature should choose glue with different temperature resistance, otherwise it is prone to wear-resistant ceramic lining as the temperature rises. The phenomenon of sheet falling off.It is suggested that you must choose an experienced construction team when constructing wear-resistant ceramics. Good wear-resistant ceramic construction can make the effect much better.
Indicator Picture
Product Image
