Jun 06, 2025 Leave a message

Comparison of ceramic ball and steel ball - measured data


Before the transformation of the cement mill using steel ball operation status quo:

 

1, the use of steel ball tons of cement ball consumption is about 60g; and steel ball breakage, alien shape is high.

2, the mill is running heavy load, starting load current and running current is high, resulting in tons of product power consumption is high.

3, the mill is running under heavy load, resulting in reduced equipment life and increased maintenance costs.

4. High running voice during production, unfavorable production environment conditions for inspection, and easy to bring occupational hazards.

 

Cement mill after the use of ceramic ball operation:


1. The cement mill using ceramic ball technology reform is mainly to replace the second bin of steel balls into ceramic balls, fine-tuning on the original gradation, after the use of wear-resistant ceramic balls, the advantages of the performance of:

(1) to reduce power consumption, the main current of the mill to reduce the main current of nearly 40%, the tons of cement comprehensive power consumption down about 4 degrees, while extending the service life of the equipment;

(2) Reduce ball consumption, the actual grinding body consumption of less than 10g, far lower than the ball consumption of steel balls.

(3) No chromium, no chromium in the grinding body, will not bring heavy metal chromium pollution;

(4) Eliminate static electricity, reduce the voice;

 

2.Comparison of electricity consumption before and after using a ceramic ball table

info-1645-265

As seen in the comparison table:

(1) the current of the cement mill is greatly reduced, and the current is reduced from 171-174A to 107-109A, with a drop of (174-109)/174=37.36%. (2) PC, P4 cement in the replacement of ceramic balls after the average table time down to about 10 tons, compared with the best table time down to about 15 tons.
(3) PC, P4 cement after the replacement of ceramic ball cement process power consumption decreased significantly, compared with the average of the whole year of 2014 fell 3.96 degrees and 4.11 degrees, respectively, power consumption and the downward trend.

 

3. After the technological transformation of each ton of cement to save electricity about 4 degrees, according to the design production capacity of 1.2 million tons of cement, the saving of electricity consumption of 4.8 million degrees.

 

4. Due to the effective movement of the mill itself reduced by 83 tons or so, extend the service life of sliding shaft, liner, reducer, motor is estimated to be about 2 years, while the service life of lubricating oil is also significantly extended by about half a year.

 

5. In terms of quality, after comparing the use of ceramic ball after the production of cement in the consistency, strength, particle gradation are no major changes, stability is better, fully meet the quality requirements.

 

The use of the effect and economic benefit analysis
per year according to the production of 120 tons of cement, the price of electricity 0.6 yuan / degree, reducing electricity consumption by 4 degrees, only this one, can save costs 1,200,000 * 0.6 * 4 = 2.88 million yuan. According to the second warehouse steel ball loading 164 tons equivalent to 82 tons of ceramic ball calculation (price according to the current price), the payback period of about 4 months.

 

In summary, wear-resistant ceramic balls of Titan Industrial Ceramics Co., Ltd. are used in cement mill grinding, which not only conforms to the general direction of the current national environmental protection industry and other policies, but also makes the enterprise's production cost drop significantly, prolongs the service life of the equipment, and can continue to create huge economic and social benefits for the enterprise.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry