High Temperature Wear Resistant Ceramic Adhesive
Products Description
High Temperature Ceramic Adhesive, also known as High Temperature Wear Resistant Ceramic Adhesive, is a specially formulated bonding material designed for fixing wear-resistant ceramic tiles, ceramic sheets, and ceramic liners onto the surfaces of industrial equipment operating under elevated temperature conditions.
Unlike conventional ceramic adhesives, this product is developed for applications where equipment surfaces are exposed to continuous heat, material impact, friction, and severe abrasion. It provides a reliable bonding layer between ceramic linings and metal substrates, helping ceramic components remain securely attached during industrial operation.
With its high-temperature bonding capability and wear-resistant protection properties, High Temperature Ceramic Adhesive is widely used in industries such as mining, cement, steel, power generation, chemical processing, and material handling.
It is particularly suitable for protecting equipment components that experience both high temperatures and abrasive material flow, helping extend equipment service life and reduce maintenance requirements.
Usage of high temperature ceramic adhesive
1. Before high temperature ceramic adhesive bonding, polish the surface of bonded parts with 100-120 abrasive cloth, and then remove oil with acetone. If possible.
2. High temperature ceramic glue can dry quickly at room temperature. Generally, 600 grams of glue should be prepared at one time. Please use it up within 30 minutes. It is better to use a container with a large bottom area for loading. Please make preparations before use, how much to use and how much to use now.
3. Accurately weigh the two components of AB in a clean and dry container according to the ratio with a pharmaceutical balance, and operate the ratio according to 1:1.Mix well and set aside. Apply the glue evenly on the treated ceramic piece (the amount of glue should be appropriate).Then carry out lamination according to the requirements of the drawing, and remove the extruded.
Technical Data
| Series | BM8080 | BM2011 | BM8180 |
| Color | White |
White (light yellow) |
Grey/White |
| Density(g/cm3) | 1.28 | 1.66~1.70 | 1.48~1.52 |
| Weight ratio(A:B) | 4:1 | 1:1 | 4:1 |
| Volume ratio(A:B) | 4:1 | 1:1 | 4:1 |
|
Operation time (200g mixing, min) |
30 | 30 | 30 |
| Full curing time(h) | 24 | 24 | 24 |
|
Tensile strength(Mpa) GB/T6329-1996 |
65.0 | 65.0 | 35.0 |
|
Shear strength(Mpa) GB/T7124-2008 |
≥10 | ≥10 | ≥18 |
| Working temperature (℃) | -60~150 | -60~150 | -60~200 |
| Expiration date(years) | 2 | 2 | 2 |
Products photo



Key Features and Advantages
-
High Temperature Resistance
Designed for bonding ceramic linings in elevated-temperature environments. It is suitable for industrial applications where conventional adhesives may lose their bonding performance due to heat exposure. The maximum service temperature depends on the specific adhesive grade and operating conditions.
-
Strong Bonding Performance
Provides reliable adhesion between wear-resistant ceramic components and metal equipment surfaces, helping reduce the risk of ceramic tiles detaching during operation.
-
Excellent Wear Protection
When used together with alumina ceramic tiles or other suitable wear-resistant ceramic liners, the adhesive helps establish a protective lining system against abrasion and material erosion.
-
Good Chemical Stability
Suitable for selected industrial environments where equipment may be exposed to dust, slurry, and certain chemical substances. Actual chemical resistance depends on the adhesive formulation and operating conditions.
Applications
High Temperature Wear Resistant Ceramic Adhesive is commonly used for ceramic lining installation in:
- Mining Industry: Chutes, hoppers, transfer pipes, and material handling equipment.
- Cement Industry: Cyclones, separators, fans, and conveying systems.
- Steel Industry: High-temperature material handling equipment and abrasive material transfer areas.
- Power Plants: Coal handling systems, ash conveying equipment, and other wear-prone components.
- Chemical Industry: Equipment exposed to abrasive powders and selected corrosive environments.
- Industrial Material Handling: Conveyors, pipelines, bins, and other equipment requiring ceramic wear protection.
Why Choose Titan High Temperature Ceramic Adhesive?
Shandong Titan Industrial Ceramics Co., Ltd. specializes in wear-resistant ceramic products and industrial ceramic lining solutions.
We provide ceramic wear protection products and supporting installation materials for various industrial applications. Our product range includes alumina ceramic tiles, ceramic lining plates, grinding media, and ceramic adhesives.
Whether you are installing a new ceramic lining system or repairing existing equipment, Titan can help you select a suitable adhesive and ceramic lining solution based on your operating temperature, equipment structure, and wear conditions.
Contact Titan today to discuss your high-temperature ceramic lining requirements and request a suitable product recommendation.
FAQ
Q: What is your terms of delivery?
A: FOB,CFR, CIF
Q: How can I get a quick quotation?
A: Please kindly send us more details about your requirements.
Q: How long is your delivery time?
A: 7-20days working days after all information is confirmed (according to different products).
Q: Do you inspect the finished products?
A: Yes, each step of production and finished products will be came out inspection by QC department before shipping.
Q: What services can we provide?
A: Accept customized according to your requirements. No strict require on the MOQ, accept small order.
Q: Can I get best price from you?
A: Of course. We don't chase excessive profits and always try to give best offer. if you are good at bargaining. you can also enjoy fun of bargaining. Just don't make it too hard!
Q: Are you a manufacturer?
A: Yes, we are. We have own factory, receive custom-made.
Hot Tags: high temperature wear resistant ceramic adhesive, manufacturers, suppliers, factory, price, made in China, ceramic floor tile adhesive and grout, flexible ceramic tile adhesive, loctite ceramic tile adhesive, Wear Resistant Ceramic Adhesive, alumina ceramic adhesive, Wear Resistant Ceramic Glue
You Might Also Like
Send Inquiry













