Wisdom Ceramic Anilox Roller for Flexo Printing, Glazing Machine, Coating Machine, etc

For a long time, our company respects contracts and keeps promises, and has been deeply supported and trusted by customers, and has achieved a good reputation in the rubber lagging, Alumina grinding ball, High Purity Alumina Filler Ball industry. We are looking forward to forming successful business relationship with customers all over the world. In our unremitting efforts, we insist on providing high-quality products, a general price strategy and the business philosophy of providing safe and reliable products to meet customer requirements.

Product Introduction:

Each ceramic rubber plate has a groove at a certain distance, which can make the foreign matters (dust, soil) on the roller discharge along the groove, so that the roller has a unique self-cleaning function, especially suitable for wet working environment.

Titan ceramic drum rubber coating is to vulcanize the wear-resistant ceramics with bumps on the surface into special rubber according to a certain layout by using advanced hot sulfur chemical technology, and then cold glue the lining plate to the drum surface to replace the traditional rubber, to prevent the sliding friction between the drum and the belt, reduce the belt slip, reduce the material adhesion on the drum surface, so as to reduce the deviation and wear of the belt, Improve the operation efficiency, make the drum and the belt run synchronously, so as to ensure the effective and large volume operation of the belt.

Properties:

1. The high wear resistance of surface ceramics is applied to the driving drum of the belt conveyor, the ceramics with special structure, the special arrangement mode and the special rubber structure, so as to increase the friction coefficient between them and the belt and prevent the belt from slipping.

2. Under the same load, it can reduce the tension of the belt and extend the life of the belt.

3. The wear resistance of the ceramic makes the service life of the driving drum more than ten times than traditional drum.

Application:

It is suitable for extremely harsh conditions such as high abrasion, easy slipping, material or surrounding environment humidity.

The construction method of ceramic drum lagging:

First of all, the roller needs to be polished and cleaned, then brushed with glue, and the back of the rubber must be fully brushed with glue. It must be brushed all over, and every place should be covered with glue. Repeatedly brushed the glue 3-4 times to ensure that the glue covers the entire back. The roller should also be brushed with glue at the same time, and it should be brushed several times to ensure that the glue covers the entire roller, and then the roller and the plate are pasted. The rope is bundled for 24 hours to further ensure the adhesion of the plate and the roller. After 24 hours, the packing rope is removed, so that the roller can be used, and the construction is extremely convenient and fast.

Our company has been adhering to the principle of seeking development through science and technology for many years and is always at the forefront of the Wisdom Ceramic Anilox Roller for Flexo Printing, Glazing Machine, Coating Machine, etc industry, which makes our products sell well both at home and abroad. It is hoped that we can gradually move towards diversification and group management in the industry and maximize the benefits of scale through the possession of the domestic market and the export of technology and products in the international market. We do not forget our original intention, forge ahead, and continue to develop high-end and advanced products to meet the diversified and all-round needs of customers and the market.