Zirconia Ceramic Lining Tile Block with Weldable Hole Autralian
We have maintained good cooperative relations with other well-known brands for many years to ensure the quality of our High Purity Ultrafine Alumina Lining Sheet, milling ceramics, alumina ceramic material. The mission statement defines the attitudes, direction and ideal image of our company in the century. In the process of development, our company has encountered severe business challenges for many times, but with perseverance and unremitting efforts, we constantly overcome difficulties. Through the interaction with users, we can fully grasp the personalized characteristics and needs of users, so as to provide the whole process information service. Our working enthusiasm is based on confidence in our company's future development.
Product introduction
Wear resistant zirconia ceramic lining brick refers to a kind of wear resistant products whick use alumina and zirconia as the main material. Compared with the alumina linging brick, wear resistant zirconia ceramic lining brick is more ductile due to the addition of zirconia. Titan produces wear resistant zirconia ceramic lining brick of different sizes and contents which can meet different customers' needs.
Advantage
1. High hardness, good wear resistance, light weight, specific gravity 4.2g/cm3, greatly reducing equipment load;
2. The bonding is firm and has good heat resistance. It is pasted on the inner wall of the equipment with heat-resistant glue. It can be used at 350°C Long-term operation without aging, the inorganic adhesive used for cemented products is wear-resistant at 750°C, and the adhesive is resistant to Strong temperature performance and adhesion performance;
3. Strong impact resistance, combined with zirconia toughness and wear resistance, the fracture toughness is comparable to that of alumina products Increased by 20%, bending strength increased by 70%, greatly improving the impact of materials on equipment;
4. High cost performance, which greatly increases the service life of the equipment and reduces the comprehensive production cost of the enterprise.
Application
Wear resistant zirconia ceramic lining brick is mainly used as liners of ball mill and transportation equipments, which can greatly reduce the wear of the equipments and prolong its service life.
Chemical Composition and Physical Properties
| Series | BMZTA | BMZR |
| AL2O3(%) | ≥75 | - |
| ZrO2(%) | ≥21 | 94.8±0.5 |
| Bending strength(Mpa) | ≥400 | ≥800 |
| Compressive strength(Mpa) | ≥2000 | - |
| Fracture toughness (MPam1/2) | ≥4.5 | ≥7 |
| Rockwell hardness(HRA) | ≥90 | ≥88 |
| Wear volume(cm3) | ≤0.05 | ≤0.02 |
| Bulk density(g/cm3) | ≥4.1 | ≥5.9 |
Specification Available
| Lining brick | ||||||
| Height(mm) | 35 | 40 | 50 | 60 | 70 | 90 |
| Width(mm) | 50 | 50 | 50 | 50 | 50 | 50 |
Length(mm) | 150 | 150 | 150 | 150 | 150 | 150 |
| Bevel lining brick | ||||||
| Height(mm) | 35 | 40 | 50 | 60 | 70 | 90 |
| Width(mm) | 45/50 | 45/50 | 45/50 | 45/50 | 45/50 | 45/50 |
| Length(mm) | 150 | 150 | 150 | 150 | 150 | 150 |
The picture
Our other product
Our workshop
Our competitive advantage is to utilize our advanced technology to reduce the cycle cost of products and provide customers with high-quality and low-cost Zirconia Ceramic Lining Tile Block with Weldable Hole Autralian. We warmly welcome you to visit our company. In the future, we will continue to value the voice of customers and contribute to the development of society through cutting-edge technology and high-quality products.
You Might Also Like
Send Inquiry