High Abrasion Weldable Ceramic Lining Tiles with Fittings Australian
Our Hexagon Ceramic Wear Resistant Lining, wear resistant ceramic tiles, Sintered Silicon Carbide Tube is trusted and supported by our customers, which has led to the rapid development of our company into a large-scale enterprise. Good customer service and after-sales service are the eternal principles of our company. We should establish the enterprise with integrity in operation and innovate constantly in products. We pay attention to the health and safety of our employees, care for their well-being, and allow them fully develop their talents and work and live happily.
Product introduction
Wear resistant zirconia ceramic lining brick refers to a kind of wear resistant products whick use alumina and zirconia as the main material. Compared with the alumina linging brick, wear resistant zirconia ceramic lining brick is more ductile due to the addition of zirconia. Titan produces wear resistant zirconia ceramic lining brick of different sizes and contents which can meet different customers' needs.
Advantage
1. High hardness, good wear resistance, light weight, specific gravity 4.2g/cm3, greatly reducing equipment load;
2. The bonding is firm and has good heat resistance. It is pasted on the inner wall of the equipment with heat-resistant glue. It can be used at 350°C Long-term operation without aging, the inorganic adhesive used for cemented products is wear-resistant at 750°C, and the adhesive is resistant to Strong temperature performance and adhesion performance;
3. Strong impact resistance, combined with zirconia toughness and wear resistance, the fracture toughness is comparable to that of alumina products Increased by 20%, bending strength increased by 70%, greatly improving the impact of materials on equipment;
4. High cost performance, which greatly increases the service life of the equipment and reduces the comprehensive production cost of the enterprise.
Application
Wear resistant zirconia ceramic lining brick is mainly used as liners of ball mill and transportation equipments, which can greatly reduce the wear of the equipments and prolong its service life.
Chemical Composition and Physical Properties
| Series | BMZTA | BMZR |
| AL2O3(%) | ≥75 | - |
| ZrO2(%) | ≥21 | 94.8±0.5 |
| Bending strength(Mpa) | ≥400 | ≥800 |
| Compressive strength(Mpa) | ≥2000 | - |
| Fracture toughness (MPam1/2) | ≥4.5 | ≥7 |
| Rockwell hardness(HRA) | ≥90 | ≥88 |
| Wear volume(cm3) | ≤0.05 | ≤0.02 |
| Bulk density(g/cm3) | ≥4.1 | ≥5.9 |
Specification Available
| Lining brick | ||||||
| Height(mm) | 35 | 40 | 50 | 60 | 70 | 90 |
| Width(mm) | 50 | 50 | 50 | 50 | 50 | 50 |
Length(mm) | 150 | 150 | 150 | 150 | 150 | 150 |
| Bevel lining brick | ||||||
| Height(mm) | 35 | 40 | 50 | 60 | 70 | 90 |
| Width(mm) | 45/50 | 45/50 | 45/50 | 45/50 | 45/50 | 45/50 |
| Length(mm) | 150 | 150 | 150 | 150 | 150 | 150 |
The picture
Our other product
Our workshop
Over the years, we continue to innovate and break through, dedicated to providing customers with good quality High Abrasion Weldable Ceramic Lining Tiles with Fittings Australian. Our company takes the good faith as the foundation, strives for the survival by the quality, wins the customer trust by the service quality. We strive to build a set of self-motivating, self-restraining and human resource operation mechanism that promotes outstanding talents to stand out.
You Might Also Like
Send Inquiry