Nov 11, 2022 Leave a message

Why is the wear-resistant ceramic adhesive AB two-component?

Wear-resistant ceramic adhesive, also known as wear-resistant ceramic adhesive, is a high-performance adhesive specially used to paste wear-resistant ceramic sheet or liner onto the surface of equipment substrate for wear-resistant protection of equipment substrate.


The main agent A is professionally modified heat and toughening resin, and the curing agent B is used together. Neither A nor B can be used alone. It is necessary to mix the adhesive in a certain proportion. Sometimes also known as abrasion-resistant ceramic AB adhesive.


How to use:


1, to play a better viscosity first need to deal with the surface of the dust, oil, rust, or other pollutants.


2, with glue. Mix the two components A and B evenly according to the proportion.


3. Evenly apply the tuned glue to the surface of the material to be glued.


4, the room temperature after 8 hours of curing treatment, can be used a small hammer gently knock check, listen to whether there is a lack of glue phenomenon, if there is, should be out, local can be re-bonded.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry