Jan 25, 2022 Leave a message

Wear-resistant ceramic glue

Different types of glue are suitable for different working conditions. Common types of working conditions are as follows:

1. Equipment washed by ash powder at a temperature below 120°C and equipment subjected to strong erosion or erosion wear of materials

2. Paste the wear-resistant ceramic sheet below 120°C on the top surface and facade of the equipment.

3. It is used to paste the wear-resistant ceramic sheet of fan impeller.

4. Medium-speed coal mill cones, coarse powder separators, powder discharge fans, coal powder pipes and other equipment subject to ash erosion, as well as equipment subjected to strong erosion or erosion wear in steel, cement, chemical and other industries.

Differences in working conditions and temperatures mean different requirements for wear-resistant ceramic adhesives. When using it, you must know the working conditions and operating temperature in advance, and select the appropriate wear-resistant ceramic glue.

 If the normal temperature glue is used for the working condition of 200 °C, how much wear-resistant ceramic glue can be used for the wear-resistant ceramic sheet during operation?

Under normal circumstances, the amount of wear-resistant glue depends on the thickness of the ceramic sheet. The thicker the ceramic sheet, the more glue is used.

Generally, the thickness of the ceramic sheet is 10-30mm, then the glue is about 2-2.5kg per square meter, and the glue is about 1.5-2kg for 8-10mm. The size of the ceramic sheet is less than 6mm, and the dosage is between 1-1.5kg/square meter. It is not that the more glue is used, but the better the paste is. On the contrary, the overflow of glue due to the excessive amount of glue will seriously affect the use effect of the ceramic sheet, and will seriously affect the falling off.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry