Nov 16, 2022 Leave a message

How to use ceramic adhesive?

Specific Steps

First of all, the metal surface needs to be polished or sandblasted to remove the oil stains and rust on the metal surface, and then it needs to be cleaned and dried with cleaning agent to ensure that the metal surface of the equipment is clean and neat, so as to facilitate the following paste operation. 


Next we need to mix the glue, mix A1 and B1 together at a ratio of 1:1, here is a special reminder, in the process of dispensing glue, we must remember one point, dispensing glue to match less glue, often with glue, remember not to match more glue, because the glue hardening speed is very fast, more with no such use will harden, will cause waste loss, Stir the two kinds of glue, AB, to one color and set for 40 minutes. 


Then the AB glue 1 to 1 weight ratio or volume ratio stirring evenly coated on the [treated metal and non-metallic surface] bonding surface and then patch, patch process does not fall off.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry