1. Clean pipe surface: effectively remove dirt, rust and other sundries.
2. grinding: the Angle mill is used to process the pipe wall, and the pipe wall is required to have no floating rust and loosening. Do not construct in the environment with humidity greater than 85% to ensure that the project quality meets excellent standards.
3. isolation measures: after removing debris, should be kept in a static dry environment to prevent dust pollution.
4. paste microcrystalline wear-resistant alumina lining: mix A, B part according to proportion, paste ceramic after uniform mixing, uniform grinding ceramic parts, no virtual adhesion and protruding phenomenon, wear-resistant ceramic layer is smooth, the gap between plate and plate is less than 0.4mm. Ceramic plates have smooth joints.
5. Welding: Place the hardware glue in the hole of the ceramic lining board, weld the full-length welder, and paste it on the hardware surface with a ceramic cap.
6. self-inspection: after pasting ceramic parts, self-inspection, re-processing of the unqualified parts, and then self-inspection.
Abrasive Resistant Alumina Sheet
