Oct 31, 2025 Leave a message

Ceramic Balls in Tower Mills: Boosting Efficiency in Complex Non-ferrous Metallic Minerals Grinding

As mineral resources become increasingly poor, fine, and complex, mining operations face growing challenges to achieve high-efficiency processing under the "dual carbon" (carbon peak & carbon neutrality) goals. Grinding remains one of the most energy-intensive stages - accounting for about 50% of total concentrator energy use - making energy savings a key path toward greener production.

 

Traditionally, steel balls have dominated fine grinding, but they come with drawbacks: high energy consumption, overgrinding, iron contamination, and excessive wear. With the advancement of high-strength, wear-resistant composite zirconia and nano-ceramic media, ceramic balls are emerging as the new generation of fine grinding media in both vertical and horizontal mills.

 

🔬 Comparative Grinding Tests

 

The study focused on secondary ball milling of magnetite ore, comparing three grinding media systems:

 

1️⃣ All steel balls

2️⃣ All nano-ceramic balls

3️⃣ Hybrid (steel + ceramic)

 

Grinding parameters:

  • Feed: 500 g
  • Grinding time: 3 minutes
  • Media filling rate: 36%
  • Pulp concentration: 67%
  • Mill speed: 96 rpm

 

Experimental Procedure and Data 

Article content

Article contentArticle content

Article content

Article contentArticle content

📈 Results

Grinding Media−0.075 mm YieldGrinding EfficiencyNotesSteel Balls84.86%90.37%BaselineNano-Ceramic Balls94.50%>95%Finer grind, less overgrindingHybrid MediaImprovedHigh stabilityBalanced performance

 

The optimal ceramic ball mix was found to be ϕ30mm : ϕ25mm : ϕ20mm = 50% : 30% : 20%, achieving the best combination of grinding efficiency and product fineness while minimizing overgrinding.

 

💡 Key Findings

✅ Higher efficiency: Ceramic and hybrid media improved grinding efficiency by 5–8% compared with steel.

✅ Reduced overgrinding: Better control of fine particle formation (−0.019 mm fraction reduced).

✅ Cleaner product: No iron contamination - improved magnetic separation recovery.

✅ Lower energy consumption: Due to lower media density and smoother motion.

✅ Extended media life: High wear resistance, maintaining spherical shape over time.

 

🌍 Toward Energy-Efficient, Low-Carbon Grinding

The results confirm that nano-ceramic and composite grinding media significantly improve fine grinding efficiency and product quality, particularly in complex polymetallic ores. Beyond operational gains, they contribute directly to carbon reduction and sustainable mineral processing, aligning with global mining decarbonization goals.

 

ZTA45

 

At Titan Industrial Ceramics, we provide ceramic composite balls with densities from SG3.7 to SG4.5, engineered for fine and ultrafine grinding of nonferrous and polymetallic ores. These products combine strength, wear resistance, and energy efficiency to deliver real cost and performance advantages.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry