
Based on the technical specifications shown in the table (Al₂O₃ content, density, hardness, wear resistance, etc.), the TA series ceramic balls (TA28, TA32, TA36, TA37, TA99) are suitable for different application scenarios:
✅ 1. TA28 (Al₂O₃ ≥60%)
Density: ≥2.90 g/cm³
Hardness: ≥7 GPa
Wear Rate: ≤1.5 g/kg·h
Features: Low alumina content, cost-effective
Recommended Applications:
Coarse grinding of minerals (e.g., copper ore, lithium ore)
Environments that do not require high wear resistance
Replacement for natural pebbles or standard ceramic balls
Cost-sensitive applications (e.g., some non-metallic minerals)
✅ 2. TA32 (Al₂O₃ ≥72%)
Density: ≥3.20 g/cm³
Hardness: ≥7.5 GPa
Wear Rate: ≤1.5 g/kg·h
Features: Good balance between cost and performance
Recommended Applications:
Medium-hardness minerals such as fluorite, bentonite, etc.
General grinding in the chemical industry
Ideal for customers seeking a cost-performance balance
✅ 3. TA36 (Al₂O₃ ≥92%)
Density: ≥3.60 g/cm³
Hardness: ≥11 GPa
Wear Rate: ≤1.3 g/kg·h
Features: High alumina content, high density and hardness
Recommended Applications:
Fine grinding in mineral processing (e.g., lithium ore purification)
Chemical and building material industries requiring fine grinding
Ceramic, pigment, and paint industries
✅ 4. TA37 (Al₂O₃ ≥92%)
Density: ≥3.70 g/cm³
Hardness: ≥12 GPa
Wear Rate: ≤0.9 g/kg·h
Features: Improved density and wear resistance
Recommended Applications:
High-energy grinding equipment (e.g., stirred mills, vertical mills)
Harsh wear conditions with long-duration grinding
Applications that demand higher durability than TA36
✅ 5. TA99 (Al₂O₃ ≥99%)
Density: ≥3.85 g/cm³
Hardness: ≥14 GPa
Wear Rate: Not specified (estimated to be extremely low)
Features: Ultra-high purity, highest hardness and performance
Recommended Applications:
Industries requiring ultra-pure environments: lithium battery, electronic ceramics, fine chemicals
Nano-level grinding (especially in stirred or horizontal bead mills)
No-contamination processes (e.g., pharmaceuticals, food industry)
High-end applications, sometimes as an alternative to zirconia balls





