High Density Alumina Grinding Balls for Fine Grinding
video

High Density Alumina Grinding Balls for Fine Grinding

TA36 alumina grinding balls are a practical option for factories which want stable grinding results without paying for high-end media. They are widely used in daily production where cost and consistency matter more than extreme performance.
Send Inquiry
Product Introduction

Products Description

 

In many grinding operations, customers are not only looking for the highest performance, but also for a solution that keeps overall production costs under control. TA36 alumina grinding balls are developed with this exact requirement in mind - delivering stable grinding results while avoiding the higher cost of premium media.

From our experience working with overseas clients, one common issue is frequent media replacement caused by unstable quality or excessive wear. TA36 alumina grinding media help solve this problem by offering a more consistent structure and controlled wear rate, which makes them suitable for long production cycles.

These alumina grinding balls are produced using refined alumina powder and a controlled sintering process. This ensures each batch maintains uniform density and reliable mechanical strength, reducing the risk of breakage inside high-speed mills.

Instead of simply focusing on hardness, TA36 grinding balls are optimized for real working conditions - balancing impact resistance, wear performance, and cost efficiency.

92-13mm

What you can expect?

 

 

  • Consistent Density: With a density of ≥3.60 g/cm³, TA36 provides reliable grinding performance for a wide range of general milling applications.
  • Improved Wear Resistance: Offers lower wear compared with conventional low-grade alumina grinding media, helping reduce media consumption and replacement frequency.
  • Stable Wet and Dry Grinding: Suitable for both wet and dry milling processes, maintaining consistent performance under different operating conditions.
  • Easy Equipment Compatibility: Designed for use in conventional ball mills without requiring major modifications to existing mill configurations.
  • Balanced Cost and Performance: Provides a practical balance between grinding efficiency, wear resistance, and operating cost.

Where Does TA36 Fit Best?

 

 

TA36 is a suitable choice for manufacturers currently using low-grade alumina grinding balls who want more reliable quality and better wear resistance without moving directly to zirconia or other high-density grinding media.

It is particularly suitable for applications where stable grinding performance and reasonable operating costs are both important.

Key Product Advantages

 

1.Reliable Grinding Performance

The combination of high alumina content and a density of at least 3.60 g/cm³ provides consistent grinding action for general powder processing. It is suitable for routine size reduction and material preparation.

2. Good Hardness and Abrasion Resistance

With a Vickers hardness of ≥1100 HV, TA36 offers good resistance to surface abrasion during grinding. This helps maintain media integrity and reduce excessive wear during normal operation.

3. Lower Risk of Product Contamination

High alumina content helps minimize contamination from the grinding media compared with lower-grade alternatives. This is especially important when maintaining product consistency is a priority.

4. Versatile Application Conditions

TA36 can be used in both wet and dry grinding processes, making it a flexible option for different production requirements.

5. Cost-Effective Alternative

For customers who need better performance than standard low-grade alumina balls but do not require the higher density and cost of zirconia media, TA36 offers a balanced solution.

Applications

 

 

TA36 alumina grinding balls are widely suitable for:

  • Mineral Processing: Grinding and size reduction of mineral materials.
  • Ceramic Raw Materials: Milling clay, feldspar, quartz, and other ceramic ingredients.
  • Chemical Industry: General grinding and dispersion of chemical raw materials.
  • Paint and Coatings: Grinding pigments, fillers, and other powder materials.
  • Fine Powder Processing: Preparation of powders requiring consistent particle size

    Technical Specifications

     

    arameter Specification
    Product Name TA36 Alumina Grinding Balls
    Alumina Content (Al₂O₃) ≥92%
    Density ≥3.60 g/cm³
    Vickers Hardness ≥1100 HV
    Grinding Conditions Wet and Dry Grinding
    Main Material High-Alumina Ceramic
    Product Type Ceramic Grinding Media

    Note: Actual performance and wear rates depend on material hardness, mill speed, grinding conditions, ball size, and operating parameters.

packing way

 

 

product-900-506

FAQ

 

Q: What is your terms of delivery?

A: FOB,CFR, CIF

Q: How can I get a quick quotation?

A: Please kindly send us more details about your requirements.

Q: How long is your delivery time?

A: 7-20days working days after all information is confirmed (according to different products).

Q: Do you inspect the finished products?

A: Yes, each step of production and finished products will be came out inspection by QC department before shipping.

Q: What services can we provide?

A: Accept customized according to your requirements. No strict require on the MOQ, accept small order.

Q: Can I get best price from you?

A: Of course. We don't chase excessive profits and always try to give best offer. if you are good at bargaining. you can also enjoy fun of bargaining. Just don't make it too hard!

Q: Are you a manufacturer?

A:    Yes, we are. We have own factory, receive custom-made.

 

Hot Tags: High Density Alumina Grinding Balls for Fine Grinding, manufacturers, suppliers, factory, price, made in China, Inert ceramic balls, ceramic alumina grinding, Alumina Ceramic Grinding Beads, High Alumina Ball, Inert Alumina Ceramic Filler Balls, inert ceramic

Send Inquiry

whatsapp

Phone

E-mail

Inquiry