Ceramic Bonding Adhesives
Product Color:white/light yellow/grey
Density（g/cm3) :1.28/1.66-1.7/1.48-1.52
Weight ratio (A:B)：4：1 /1：1
Volume ratio (A:B)：4：1 1：1
Working temperature(℃):-60-150/-60-200
Expiration date(years）:2
Description
Ceramic bonding adhesives are composed of toughening resin and special curing agent, and have the characteristics of high viscosity, good toughness and excellent water resistance. Ceramic bonding adhesives produced by our company is the result of extensive research and many years of experience. This product can be used to firmly stick the wear-resistant ceramic sheets to the surface of the equipment, extend the service life of the equipment, reduce equipment maintenance, and reduce the cost of the enterprise.
Features of Ceramic bonding adhesives
1. High adhesion and strong toughness.
2. Good wear resistance, high melting point, more wear-resistant than other materials.
3. It has strong acid and alkali tolerance.
Technical Data
| Series | BM8080 | BM2011 | BM8180 |
| Color | White |
White (light yellow) |
Grey/White |
| Density(g/cm3) | 1.28 | 1.66~1.70 | 1.48~1.52 |
| Weight ratio(A:B) | 4:1 | 1:1 | 4:1 |
| Volume ratio(A:B) | 4:1 | 1:1 | 4:1 |
|
Operation time (200g mixing, min) |
30 | 30 | 30 |
| Full curing time(h) | 24 | 24 | 24 |
|
Tensile strength(Mpa) GB/T6329-1996 |
65.0 | 65.0 | 35.0 |
|
Shear strength(Mpa) GB/T7124-2008 |
≥10 | ≥10 | ≥18 |
| Working temperature (℃) | -60~150 | -60~150 | -60~200 |
| Expiration date(years) | 2 | 2 | 2 |
What should we pay attention to during storage and transportation?
1. Storage conditions: This product needs to be sealed and stored in a ventilated, cool and dry place. The expiration date is 2 years.
2. Transportation conditions: Avoid inversion and avoid bumps.
Precautions for pasting wear-resistant ceramic sheets
1.After mixing, AB glue starts to solidify and becomes more viscous. Aim to mix a smaller quantity of glue at a time.
2. The product manual's mixing instructions should be followed when using wear-resistant ceramic glue. It is impossible to reach the target viscosity if the ratio is off.
3. Depending on the temperature at which it will be used, wear-resistant ceramic glue should be chosen. Shedding is likely to occur at too-high temperatures, while waste is likely to occur at too-low temperatures.
4.Apply the wear-resistant ceramic glue evenly, otherwise the wear-resistant protective layer may fall off partially during use. After the ceramic sheet is pasted, use a rubber hammer to gently tap it to make the construction surface flat.
5.It is recommended to wear protective gloves when using it. If it sticks to the skin, wipe it off with alcohol and clean it with detergent.
Application
FAQ
1.Are you a trading company or manufacturer?
We are a manufacturer.
2.Could you produce the product as customized a?
Yes, we can do it
3.What is your worktime ?
A.M 8:00-P.M5:30.
However,for any question from internet,telephone ,wechat ,whatsapp etc. answer you immediately.
4.How long is your delivery time?
7-20days working days after all information is confirmed (according to different products).
5.Can I get a discount?
Yes, for the order quantity negotiate with us.
6.What is your MOQ?
500 kgs for each size, small order is also ok.
Hot Tags: ceramic bonding adhesives, manufacturers, suppliers, factory, price, made in China, Ceramic Adhesive, Alumina Ceramic Splicing Tiles, alumina ceramic adhesive, ZAT Ceramic Plate, grinding alumina ceramic, heat proof glue for ceramic
You Might Also Like
Send Inquiry