Wear Resistant Alumina Ceramic Rubber Composite Liner for Corrosion Solution
We have experienced technicians and skilled production staff to provide our customers with high quality and efficient Alumina Ceramic Filler Ball, Square Anti Wear Alumina Plate, ceramic wear tiles. Since its establishment, our company has adopted advanced management methods, strictly controlled the channels of purchasing goods, reduced the cost of customers and made the company enjoy a good reputation. Our company's safe and trustworthy official website plays a very good role in shaping our company's image and improving our reputation.
Product Introduction
92% 95%Alumina Abrasive Rubber Ceramic Composite Wear Plate is a kind of composite board which adopts advanced heat vulcanization process. Paste the ceramic rubber wear liner to the inner of the equipment can form a solid and strong anti-wear liner. The ceramic rubber wear liner combines the advantages of high hardness of ceramic and high cushioning capacity of rubber. The rubber not only has the good anti-wear and anti-corrosion effect, but also reduce the noise.
Common specifications
250 x 250mm, 300 x 300mm, 250 x 00mm, 500 x 500mm, etc.
Ceramic thickness: 4---50mm
Rubber thickness: 5---20mm
Steel plate thickness: 4---8mm
Advantage
The ceramic rubber composite liner combines the advantages of high hardness of ceramics and high cushioning and fatigue resistance of rubber, which can well solve the problem of equipment wear resistance during the transportation of bulk materials. The addition of rubber not only has good anti-wear and anti-corrosion effects, but also can prevent production stoppage and reduce noise due to material accumulation. It is also possible to directly vulcanize toughened wear-resistant ceramic sheets and special rubber on steel plates with countersunk bolts to form wear-resistant liners of various shapes, which are convenient for installation and replacement.
Chemical composition and physical properties
| Item | Rubber |
| Bulk density(g/cm3) | 1.4 |
| Tensile strength at break (Mpa) | ≥14 |
| Elongation at break (%) | ≥250 |
| Shore hardness(HA) | 48~65 |
| Adhesive between rubber & steel (Mpa) | ≥3.5 |
| Adhesive between rubber & ceramic (Mpa) | ≥3.5 |
Thermal conductivity (normal temperature) (W/M·k) | 2 |
| Aging period (years) | ≥1.5 |
| Series | BM92 | BMG95 |
| AL2O3(%) | 92±0.5 | 95±0.5 |
| Bending strength(Mpa) | ≥220 | ≥250 |
| Compressive strength(Mpa) | ≥1050 | ≥1300 |
| Fracture toughness (Mpam1/2) | ≥3.70 | ≥3.80 |
| Rockwell hardness(HRA) | ≥82 | ≥85 |
| Wear volume(g/cm3) | ≤0.5 | ≤0.2 |
| Bulk density(g/cm3) | ≥3.6 | ≥3.65 |
Application
Ceramic Rubber Wear Liner are widely used in the coal conveying and ash discharge systems of thermal power plants and the conveying, batching silos, hoppers, mixers, pelletizing discs and other equipment in the metallurgical and steel industry, effectively solving the problem of large material drop and strong impact , the material is bonded, which leads to the problem of low service life of the ingredient conveying system; at the same time, the ceramic rubber composite liner can be twisted and cut, and is suitable for the installation of various special-shaped equipment.
Picture
The contruction case
Our workshop
FAQ
Q: Are you manufacturer?
A: Yes, We manufacture bulk products in our factory and produce small quantity and customer synthesis products
Q Do you have stock?
A: We understand most customers prefer stock,so we'll try to keep stock for most productsHowever, for some rare products, we won't keep stock and it needs time to synthesize.
Q: What certificates and documents do you offer?
A: Some technical paperwork is available, such as COA,TDS,MSDS etc.
Q: Why we could choose you?
A: Powerful technical support-come from our highly skilled & fully experienced staff, work.ing in chemical industry for over 20 years, in average.
Strict quality control-comes form oursophisticated management system.
Professional and warm sales team-since we believe wecan only win via our hard work in a competitive world.
Quick response and excellent presale and after sale service-since we believe our custom-ers deserve all the best service.
Q: Can I get best price from you?
A: Of course. We don't chase excessive profits and always try to give best offer. if you are good at bargaining. you can also enjoy fun of bargaining. Just don't make it too hard!
Q:How should I pay?
A: We accept payment ways of T/T ,LC at sight.
Our company adopts advanced technological process and correct technical operation to develop high-quality Wear Resistant Alumina Ceramic Rubber Composite Liner for Corrosion Solution. Our company will sign relevant agreements with partners according to commercial principles. We adhere to the corporate philosophy of cooperation, innovation and win-win, and are committed to the construction of a harmonious corporate culture.
You Might Also Like
Send Inquiry