Technical Custom Oxide Ceramic Wear Linings as Abrasion Resistant Materials
The ZAT Ceramic Plate, wear liners mining, Wear Resistant Ceramic Lining Cube products produced and operated by our company occupy a high position in the consumer market. We hope to help all employees show their talents, realize their life values and ideals, and live a dignified life. We provide personalized services according to the characteristics of different types of customers, and proactively formulate perfect service standards for more customers. We have strong new product design and development capabilities because of our professional research and development team. We also ensure that your choice is going to be crafted with the highest good quality and dependability.
Product introduction:
Chute Liner Wear Resistant Material are mainly used in dense - medium cyclone, chutes and hoppers with serious impact in mining industry.The inner wall of the groove is often subjected to the wear and impact of materials, which often leads to the damage of the groove wall. The wear-resisting ceramics pasted on the inner wall of the groove can effectively reduce wear.
Advantage of Chute Liner Wear Resistant Material:
high hardness
strong abrasion resistance
smooth surface
Chemical Composition and Physical Properties:
| Series | BM92 | BMG95 | BME95 | BMZTA | BMZR |
| AL2O3(%) | 92±0.5 | 95±0.5 | 95±0.5 | ≥75 | - |
| ZrO2(%) | - | - | - | ≥21 | 94.8±0.5 |
| Bending strength (Mpa) | ≥220 | ≥250 | ≥300 | ≥400 | ≥800 |
| Compressive strength (Mpa) | ≥1050 | ≥1300 | ≥1600 | ≥2000 | - |
|
Fracture toughness (MPam1/2) |
≥3.70 | ≥3.80 | ≥4.0 | ≥4.5 | ≥7 |
|
Rockwell hardness (HRA) |
≥82 | ≥85 | ≥88 | ≥90 | ≥88 |
| Wear volume (cm3) | ≤0.25 | ≤0.2 | ≤0.15 | ≤0.05 | ≤0.02 |
|
Bulk density (g/cm3) |
≥3.6 | ≥3.65 | ≥3.7 | ≥4.1 | ≥5.9 |
Specification Available:
| Type | Length(mm) | Width(mm) | Height(mm) |
| Flat liner | 50~150 | 25~100 | 6~50 |
| Weldable liner | 50~150 | 30~100 | 10~50 |
| Trapezoidal liner | 50~150 | 20~100 | 8~50 |
Application
Chute liner wear resistant material created to address the frequent issue of wear and tear on machinery and equipment. In order to protect the inner wall of the conveying device and prevent equipment failure and shutdown maintenance due to material wear, the chute wear-resistant lining plate is primarily used in material conveying devices in the coal mine, iron ore, petrochemical industry, cement, etc.; this increases the equipment's production capacity and operational efficiency. Coal mills, pulverizers, gas cushion furnaces, catalytic cracking units, furnaces, and screening apparatus are among the wear-resistant applications for which it can be employed.
About Us
The Technical Custom Oxide Ceramic Wear Linings as Abrasion Resistant Materials we produce is fully compliant with market standards and has achieved outstanding results with excellent production technology and high quality. Our company relies on advanced equipment, mature research and development technology foundation, market foundation, brand foundation, team foundation at all levels. Our new strategy will enhance the operating effectiveness of the company and promote its sustainable, healthy and stable development.
You Might Also Like
Send Inquiry