High-Density Sintered Alumina Grinding Media Balls 92%
The key to our success is 'Good Product Quality, Reasonable Value and Efficient Service' for ceramic tile liner, ball mill lining, Ceramic Tube Elbow. We emphasize the quality of the products as the basis of development, and strive to achieve perfection, to be guided by market information and to respond to the service principle of the different tastes of consumers. We adhere to the development concept of quality for benefit, technology for progress and management for development. The company unswervingly insists on providing users with all-round, diversified and wide-level services.
Product Introduction
Sintered inert ceramic balls, also known as inert alumina ceramic balls and Sintered Alumina Ceramic Ball ,are produced from kaolin, bauxite, etc., and then formulate the raw materials according to the customer's chemical composition requirements, and then fill them into the ball mill according to the proportion of the formulated mud. Grinding inside, after being ground into slurry, the slurry is quickly turned into powder through a spray drying tower, and then the powder is enameled into a ball of a suitable size by a enamel machine, and the sphere is dried and sintered at a high temperature to become a porcelain ball.
Advantage
Inert alumina ceramic ball has the characteristics of high temperature and high pressure resistance, low water absorption and stable chemical properties. It can withstand the corrosion of acid, alkali and other organic solvents, and can withstand the temperature changes in the production process.
Application
Sintered Alumina Ceramic Ball is used as tower packing ball and catalyst carrier in petroleum, chemical industry and other industries, and as base filling material for hydrogenation refining unit, catalytic reforming unit, isomerization unit and demethylation unit in petrochemical plant, chemical fiber plant, alkylbenzene, ethene plant and natural gas plant.
Performance table of Sintered Alumina Ceramic Ball
Product performance | 90 series | 92 series | 95 series | 99 Series |
AI2O3 (%) | More than 90 | More than 92 | More than 95 | More than 99 |
Fe2O3 (%) | Less than 0.3 | Less than 0.25 | Less than 0.15 | Less than 0.10 |
Compressive strength (60mm) | ≥ 9 (KN / piece) | ≥ 11 (KN / piece) | ≥ 13 (KN / piece) | ≥ 15 (KN / piece) |
Water absorption (%) Moisture content | Less than 7 | Less than 6 | Less than 5 | Less than 5 |
Bulk density (g/cm3) Bulk density | More than 2.8 | More than 3 | More than 3.1 | More than 3.3 |
Bulk density (g/cm3) Stacking density | More than 1.7 | More than 1.9 | More than 2 | More than 2.15 |
Picture
We also have grinding ceramic beads
Our workshop
FAQ
1. Who are we?
We are based in Shandong province, China, professional in wear-resistant ceramic ,sell goods to everywhere of the world.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always regular quality inspection during mass production
Always final Inspection before shipment;
3.How long is your delivery time?
7-20days working days after all information is confirmed (according to different products).
4. How do I get a quote from your company?
Send your message to our sales staff in the input box below and we will get back to you within a few hours on business days.
You also can contact us directly through the deal manager (click Chat Now on the right side of this page).
5. What is your monthly capacity?
500-650ton per month
6. What kinds of ceramic wear resistant liners do you manufacture?
92%alumina liner, 95%alumina liner, T95%alumina liner, zirconia tile liner, ZTA tiles , ceramic-rubber composite plates, wearing compound .
7.. What is the delivery time?
If we have stock, the delivery time is within 5-7days after order confirmed. If there is no stock, it is usually 15-20days.
8. Can you manufacture ceramic liner according to customers' desgin?
Yes, we have engineer team and we can produce ceramic parts according to the drawings of the customers.
9. What is the packing?
Bag or carton, and then wooden pallet or wooden box, 20~25tons per 1*20"FCL
We are well aware that technology is a direct manifestation of the company's hard power and the cornerstone for us to provide better High-Density Sintered Alumina Grinding Media Balls 92% to customers. Our objective is 'to supply first step products and best service for our customers, thus we are sure you must have a margin benefit through cooperating with us'. Our company adheres to the tenet of 'treat customers with sincerity and win with quality', gathers professionals, constantly innovates and introduces advanced design and technology, and our strength is in the leading position among peers.
You Might Also Like
Send Inquiry