High Crush Resistance Rubber Ceramic Cylinder Composite Liner with 92 Alumina Ceramics

High Crush Resistance Rubber Ceramic Cylinder Composite Liner with 92 Alumina Ceramics

rubber composite ceramic liner is mainly the alumina ceramic sheet through the vulcanization of alumina ceramics and rubber for the combination, and then through welding or paste on the way of the equipment on the inner wall, so as to form a solid wear layer, play the role of wear-resisting equipment, corrosion resistance, impact resistance.
Send Inquiry
Product Introduction

Our Curved Pipe Tile Liner, Wear-resistant Rubber-ceramic Composite Plate, Wear Resistant Ceramic Lining with Buckle is very advantageous since we have introduced a large number of advanced production equipment, with imported high-quality raw materials, and the modern management model in line with international standards. The products sold by our company are developing in the direction of specialization and have achieved a qualitative leap forward on the original basis. We absorb new ideas, strict quality control, all-round service tracking and adhere to make high-quality products. We tale the principle of "our service has no starting point and satisfaction has no end point".

Product introduction:

The belt conveyor has a strong conveying capacity, which can save a lot of manpower and material resources and greatly improve work efficiency. However, there will inevitably be some problems in long-term work. The conveyor belt will sometimes slip. The main reason for the slippage is the friction. The friction between the conveyor belt and the roller is insufficient, and the speed of the conveyor belt will be lower than that of the roller, resulting in slippage. . The reason for the lack of friction between the roller and the conveyor belt is mostly because the water content of the material is too high or the working environment is humid. It is necessary to wrap the roller with ceramic rubber sheet, which is suitable for wet environments, to increase the friction between the roller and the conveyor belt. 

The rubber ceramic molded wear plate is made by vulcanizing ceramics into rubber. It has the cushioning performance of rubber and wear resistance of ceramic.

 

 

  Properties:

1. Using rubber vulcanization technology, the ceramic is embedded in the rubber to form a strong and buffering anti-wear layer.

2. The steel plate with bolt can be vulcanized together with the ceramic &rubber plate, which will be easy for installation.

3. Impact resistance. The board has good cushion performance which can effectively alleviate the impact of ore falling from the high altitude.

4. Not easy to fall off. The composite liner is vulcanized as a whole, and each plate has bolts passing through the bottom steel plate, so the welding is very firm.

5. Easy for maintenance. The composite liner is more than 60% lighter than the wear-resistant steel plate, so the installation is very convenient.


Application:

The rubber ceramic molded wear plate is used in high wear parts of mine and mineral processing equipment, such as pipes, tanks, deflectors, scrubbers, overflow inclined walls and loading tanks, hopper, loader, construction machinery, metallurgical machinery, cement plant, mining machine, thermal power plant, coal yard, etc.


Chemical composition and physical properties:

Index
Rubber
Bulk density(g/cm3)1.4
Tensile strength at break(Mpa)≥14
Elongation at break(%)≥250
Shore hardness(HA)48~65
Adhesive between steel&rubber (Mpa)≥3.5
Adhesive between rubber&ceramic(Mpa)≥3.5
Thermal conductivity(normal temperature)    (W/M·K)2
Aging period(years)≥1.5
Working temperature(℃)-50~200


Series
BM92BMG95
AL2O3(%)92±0.595±0.5
Bending strength(Mpa)≥220≥250
Compressive strength(Mpa)≥1050≥1300
Fracture toughness       (MPam1/2)≥3.70≥3.80
Rockwell hardness(HRA)≥82≥85
Wear volume(g/cm3)≤0.5≤0.2
Bulk density(g/cm3)≥3.6≥3.65


Picture







We open up the market with the spirit of 'bright sword', constantly cooperate with the market development trend and the growing social demand and are determined to reform and innovate, so as to make the High Crush Resistance Rubber Ceramic Cylinder Composite Liner with 92 Alumina Ceramics quality more perfect. Quality is the foundation of the company's survival and development and the core of ensuring product quality is technology. In terms of the scale of business operations, we hope that the future development can flourish like vast stars and create unlimited possibilities for eternal development.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry