Ceramic Anilox Roller for Offset Printing Machine

We constantly surpass ourselves, and are committed to continuing to provide manufacturers and customers with leading technology and cost-effective Zirconium-aluminium Composite Ball, Wear Resistant Alumina Lining Tile, Alumina Ceramic Filler Ball. We are committed to the real needs of customers actively provide solutions, and to share with customers the most advanced products and technology. We attach great importance to establish a long-term cooperative relationship with our customers of different industries, and try our best to create value for them. Our company has advanced equipment, strong technical force and complete product varieties. On the way forward, we will continue to pursue there is no best but better.

Product Introduction:

Each ceramic rubber plate has a groove at a certain distance, which can make the foreign matters (dust, soil) on the roller discharge along the groove, so that the roller has a unique self-cleaning function, especially suitable for wet working environment.

Titan ceramic drum rubber coating is to vulcanize the wear-resistant ceramics with bumps on the surface into special rubber according to a certain layout by using advanced hot sulfur chemical technology, and then cold glue the lining plate to the drum surface to replace the traditional rubber, to prevent the sliding friction between the drum and the belt, reduce the belt slip, reduce the material adhesion on the drum surface, so as to reduce the deviation and wear of the belt, Improve the operation efficiency, make the drum and the belt run synchronously, so as to ensure the effective and large volume operation of the belt.

Properties:

1. The high wear resistance of surface ceramics is applied to the driving drum of the belt conveyor, the ceramics with special structure, the special arrangement mode and the special rubber structure, so as to increase the friction coefficient between them and the belt and prevent the belt from slipping.

2. Under the same load, it can reduce the tension of the belt and extend the life of the belt.

3. The wear resistance of the ceramic makes the service life of the driving drum more than ten times than traditional drum.

Application:

It is suitable for extremely harsh conditions such as high abrasion, easy slipping, material or surrounding environment humidity.

The construction method of ceramic drum lagging:

First of all, the roller needs to be polished and cleaned, then brushed with glue, and the back of the rubber must be fully brushed with glue. It must be brushed all over, and every place should be covered with glue. Repeatedly brushed the glue 3-4 times to ensure that the glue covers the entire back. The roller should also be brushed with glue at the same time, and it should be brushed several times to ensure that the glue covers the entire roller, and then the roller and the plate are pasted. The rope is bundled for 24 hours to further ensure the adhesion of the plate and the roller. After 24 hours, the packing rope is removed, so that the roller can be used, and the construction is extremely convenient and fast.

Our items are commonly identified and trusted by customers and may fulfill continuously switching economic and social wants of Ceramic Anilox Roller for Offset Printing Machine. We learn from advanced management concepts and models, actively integrate and innovate, so that management level and efficiency are continuously improved, and operational capabilities are continuously enhanced. 'Making the Products of High Quality' is the eternal goal of our company.