Anti-Corrision Alumina Ceramic Lined Elbows Pipe Liner Manufacturers
We pay attention to product development and quality, so that our Alumina Ceramic Special-shaped Liner, aluminum oxide alumina ceramic, Sintered Alumina Ceramic Hole Ball reaches the leading level of similar products. We continue to invest in product development, quality control, etc., and continuously improve our products and services to meet the requirements of users. We can provide more cost-effective products and services for more domestic and foreign users. We wholeheartedly welcome customers all over the world come to visit our factory and have a win-win cooperation with us! Additionally, we welcome visitors to our factory from all over the world for much better recognizing of our corporation.
Product Introduction
The ceramic lining tiles of Anti-Wear Alumina Ceramic Pipe Elbow is a special corundum ceramic made by calcining at high temperature with Al2O3 as the main raw material and rare metal oxide as the flux. Its Rockwell hardness is hra80-90, the hardness is second only to diamond, and its wear resistance is 266 times that of manganese steel and 171.5 times that of high chromium cast iron, which can greatly prolong the service life of pulverized coal pipe elbows.
Power Plant Piping Requirements?
The pulverized coal conveying pipes of boilers in thermal power plants are wear-resistant, and the design is required to have factors such as anti-leakage, anti-corrosion, rain-proof, and anti-freeze. The focus is on wear and corrosion resistance. The overall performance of the piping system, especially the wear resistance, is directly related to the operation of the entire power plant. Cost and economics are key issues in power plant engineering and maintenance.
Considering the wear resistance, high temperature resistance and anti-corrosion performance of the pipeline comprehensively, considering the comprehensive wear-resistant scheme from the aspects of convenient construction, low manufacturing cost and relatively simple manufacturing process, the wear-resistant ceramic lining tiles can solve some problems.
Installation method of ceramic lining plate
The wear-resistant ceramic plate commonly used in the pulverized coal pipeline wear-resistant elbow is a welded ceramic sheet with a hole in the middle, with a steel bowl and a ceramic cap. The construction of wear-resistant ceramic sheets is also convenient. The ceramic sheet with buckle tapered hole is directly welded to the steel body with the heat-resistant steel bowl, and then sealed on the tapered hole of the ceramic sheet with buckle ceramic plug and glue, the overall beauty is all ceramic surface. In this way, the firmness of the ceramic sheet pasted on the pulverized coal pipe is further enhanced. The advantage of ceramic veneers is that they are easy to repair and repair. Even if the pipeline is worn out during operation, it can be repaired directly, saving manpower and material resources.
In addition to the welding of ceramic parts, there are also methods such as stud welding process, self-flame forming, and wear-resistant ceramic tubes, which need to be analyzed in detail. At present, the use of alumina wear-resistant ceramic pipe elbows has been very extensive.
Chemical Composition and Physical Properties
Inside Ceramic Lining | |||
| Series | BM92 | BMG95 | BME95 |
| AL2O3(%) | 92±0.5 | 95±0.5 | 95±0.5 |
| Bending strength (Mpa) | ≥220 | ≥250 | ≥300 |
| Compressive strength(Mpa) | ≥1050 | ≥1300 | ≥1600 |
| Fracture toughness(MPam1/2) | ≥3.70 | ≥3.80 | ≥4.0 |
| Rockwell hardness(HRA) | ≥82 | ≥85 | ≥88 |
| Wear volume(cm3) | ≤0.25 | ≤0.2 | ≤0.15 |
| Bulk density(g/cm3) | ≥3.6 | ≥3.65 | ≥3.7 |
Application
In addition to being used in thermal power plants, Coal conveying, material conveying system, pulverizing system, ash discharge, dust removal system and other mechanical equipment with large wear and tear in thermal power, steel, smelting, machinery, coal, mining, chemical, cement, port and wharf enterprises, etc., can be used according to different Choose different types of products according to your needs.
The picture
Our pipe reference
Our product
Our workshop
Together with the 'Client-Oriented' enterprise philosophy, a arduous good quality control technique, sophisticated producing equipment and a sturdy R&D staff, we generally offer superior quality merchandise, superb solutions and aggressive rates for Anti-Corrision Alumina Ceramic Lined Elbows Pipe Liner Manufacturers. In the future, we will establish the core advantages of "intelligent manufacturing". An excellent company is not only reflected in its successful economic benefits, but also needs to adhere to its own values.
You Might Also Like
Send Inquiry