It can be learned from various platforms that the composite ceramic wear-resistant ceramic lining plate is mainly a composite product made of small ceramic blocks and rubber by vulcanization. What does it look like in detail?
The existing connection methods include adhesive, welding and bolt, in which two in one can only be connected by adhesive, and three in one can be connected by welding and bolt
Applicable range: 1. Applicable temperature: - 40 ℃ ~ 100 ℃
2. Object of use: anti-wear lining of various equipment and pipelines (such as blanking chute, hopper, etc.)
Characteristics of composite ceramic wear-resistant lining plate:
1. Impact resistance: the alumina wear-resistant ceramic lining rubber has good cushioning performance and can cushion the impact caused by ore falling from high altitude. The wear-resistant ceramic lining has wear resistance but insufficient toughness because the main raw material of the product is alumina. When the impact reaches a certain degree, the wear-resistant ceramic rubber composite plate must be selected
2. The construction is convenient, and there is no gap after the lining plate is installed. The rubber composite lining plate can be twisted and cut, and is suitable for the installation of various special-shaped equipment
3. No material sticking and blocking: due to the high strength and corrosion resistance of ceramics, the phenomenon of material sticking and blocking of equipment can be greatly solved.
4. It has strong wear resistance, impact resistance and corrosion resistance. Rubber elastomer has excellent damping effect and can reduce the noise generated during material transportation
5. The density is lower than that of steel plate, the weight is light, and because of its high wear resistance, it does not need to be replaced frequently, which can save a lot of time.
Generally, it can be used as round surface or corner. In short, composite plate is a practical industrial wear-resistant material.





