1. It has large hardness and strong toughness. Its Rockwell hardness is more than hra86, which is second only to diamond and far exceeds the wear resistance of wear-resistant steel and bimetallic composite plate. Bomai ceramics adopts 95% alumina and a unique formula of adding a variety of wear-resistant materials. It is formed by 100 tons of dry pressing. It has the characteristics of high density, high toughness and wear resistance.
2. Excellent wear resistance. Measured by the Powder Metallurgy Research Institute of Central South University of technology, its wear resistance is 266 times that of manganese steel and 171.5 times that of high chromium cast iron. Under the same working conditions, the service life of the equipment can be extended by at least ten times.
3. Light weight, with a density of 3.6-4.15g/cm3, only half of that of steel, which can greatly reduce the equipment load.
4. Impact resistant and wear-resistant ceramics introduce Cr2O3 and TiO2 with a lattice similar to AI2O3 into the formula, and add ZnO whiskers to form a solid body with AI2O3 during sintering, which plays a role in refining grains, promoting sintering and improving fracture toughness. The fracture toughness of Bomai wear-resistant ceramics is KIC ≥ 4.8mpa/m.
5. It has firm adhesion and good heat resistance. The wear-resistant ceramic sheet is pasted with high-strength ceramic structural adhesive. It can run for a long time at 350 ℃ without aging, which can ensure that the ceramics will not fall off during long-term operation at high temperature.





