Wear-resistant ceramic tiles lined hopper
Ceramic lining board for silo: Wear-resistant ceramics are 92% alumina wear-resistant ceramic lining board. The rubber layer of the wear-resistant ceramic lining board has no warping, peeling, degumming, and poor joints before and after construction. Defects such as tightness, separation, degumming, etc., fully meet the quality standards required by customers. Before construction, clean the surface of the steel plate to remove impurities, dust, and rust, so that the surface of the steel plate has a metallic color. Then according to the specific size of the coal hopper and ceramic specifications, lofting and cutting. After completing these preliminary works, the wear-resistant ceramic liner can be glued.
Apply the prepared glue evenly on the steel plate and the wear-resistant ceramic liner with a scraper, and move it in one direction to ensure that there is no lack of glue, no glue leakage, no bubbles, and no accumulation. Then, according to the actual situation of the ceramic paste, the ceramic is modified and cut twice to try to achieve a smaller gap and a smooth surface. Subsequently, the wear-resistant ceramic liner is welded to the steel plate, covered with a ceramic cover and fixed with glue.






