Jun 10, 2023 Leave a message

Chemical And High Temperature Stability Of Silicon Nitride Ceramic Balls

Chemical and High Temperature Stability of Silicon Nitride Ceramic Balls

chemical stability

Silicon nitride ceramic balls should have anti-oxidation and corrosion stability in oxidation and corrosion environments, especially in the contact area where the oil film on the surface is squeezed out by repeated rolling. Stainless bearing steel, such as 9Cr18Mo, has limited chemical stability, and even most acids can corrode this stainless steel, so it is not suitable for bearings in the chemical industry, and silicon nitride is resistant to most acids, such as hydrochloric acid, Sulfuric acid, nitric acid, phosphoric acid and alkalis, such as sodium hydroxide solution, have high chemical stability. Only the mixed solution of hydrofluoric acid, hydrochloric acid, and nitric acid can corrode silicon nitride, which can be used as an etchant for ceramic samples.

high temperature application

Silicon nitride balls have good temperature characteristics, especially suitable for high temperature environments. When high-temperature bearing steel has lost its hardness and strength in a high-temperature environment, silicon nitride has not changed. For example, the service temperature limit of M50 high-temperature bearing steel is about 400°C. When this temperature is reached, the hardness of the steel will drop greatly, while silicon nitride completely maintains the original hardness in this temperature range. Only at about 800°C, its hardness will decrease. Hardness and strength only begin to decline. The hardness value here is calibrated relative to the hardness of standard GCr15 rolling bearing steel at room temperature.

When the temperature rises, ceramics will not deform or shrink, and maintain good dimensional stability, while bearing steel must undergo special heat treatment to maintain good dimensional stability. However, when higher requirements are placed on smooth operation, life and reliability of operation, solid lubricants should be used for ceramic bearings in high-temperature and high-speed working environments.

1686357572

Send Inquiry

whatsapp

Phone

E-mail

Inquiry