Aug 27, 2021 Leave a message

Precautions For Application Of Grinding Medium in Production Process

1. Material hardness: materials with Mo hardness below 8 have excellent performance; Materials with Mo hardness above 9 are not recommended;


2. Linear speed: below 15m / s, excellent performance; If it exceeds 17 m / s, the wear rate increases, the ball deformation and damage probability increase.


3. Material concentration: for slurry with viscosity less than 1000, ball eating phenomenon will occur, resulting in increased wear and equipment loss; The thinner the slurry, the more obvious the trend.


Precautions for use of CE TZP grinding medium (cerium zirconium bead)


1. Material hardness: materials with Mo hardness below 6 have excellent performance; Materials with Mo hardness above 7.2 are not recommended;


2. Linear speed: below 10m / s, excellent performance; If it exceeds 12m / s, the wear rate increases, the ball deformation and damage probability increase.


3. Material concentration: for slurry with viscosity less than 800, ball eating phenomenon will occur, resulting in increased wear and equipment loss;


Send Inquiry

whatsapp

Phone

E-mail

Inquiry