The aluminum oxide lining board has the characteristics of good wear resistance, impact resistance, convenient construction, etc. Its theoretical wear resistance is equal to 260 times of manganese steel, 170 times of chromium steel.Products are widely used in steel, electricity, coal, cement and other industries.
Our company's existing wear-resistant ceramic lining plate pipe mold size of 150, 130, 110, we can also according to customer requirements mold production of other specifications of products.
For pipeline trapezoidal wear-resistant ceramic lining construction, at the time of construction, attention should be paid to welding wear-resisting ceramic lining protection for wear-resisting surface size joint construction, because most of the customer on how to use welding wear-resistant ceramic lining board to do don't know how to do wear protection, bo mai ceramic experts wrote a detailed explanation of the construction, to share with everyone here.
The construction of pipeline trapezoidal liner is generally divided into three parts: 1.2. Mixing and applying of ceramic glue;3. Welding of ceramic plates.Let's look at it step by step.
A: ceramic piece of cutting, because this kind of alumina ceramics piece of hardness is very high, ordinary cutting material for machining hard, we usually use diamond cutting blades, first of all, on the surface construction lofting, determine the specific size you can use the blade to cut cut, the cut blade warming faster water for cooling.
Two: ceramic glue mixing and daub, ceramic glue is divided into A,B component with how much mix how much, do not mix too much at one time, otherwise after using not complete solidification on the failure.When daub, pay attention to do not use to weld the hole up, evenly apply around the hole, and then press hard on the working surface.
Three: the welding of ceramic chip, after the second film of paste, ceramic chip has actually been very firmly fixed in the surface of the work, but we in order to make more impact resistance, and the small holes in the iron caps on the porcelain plate with welding process will work iron cap and surface of welding, after welding the small ceramics coated with glue on the ceramics in the holes.
