How To Use Wear-resistant Ceramic Glue

How to use wear-resistant ceramic glue
1. Product use
In recent years, the use of wear-resistant ceramic adhesives to join wear-resistant ceramics and equipment metal parts is an effective method. After development, the technology has been extended to electric power, metallurgy, mining, cement and other industries, and has been widely used and recognized. Wear-resistant ceramic adhesives can be used to firmly bond wear-resistant ceramic sheets to the surface of equipment that has been heavily washed by materials to extend the service life of these equipment and reduce maintenance of these equipment, thereby reducing the replacement of new equipment and reducing equipment costs. reduce operation and maintenance costs and reduce production losses caused by downtime.
2. How to use
1. Surface treatment: grinding or sandblasting to remove dust, oil and rust on the surface of the adherend. The surface to be adhered should be clean and dry;
2. Glue preparation: According to the mass ratio a:b=4:1 (or 1:1), stir evenly in a dry and clean container (no water, no steam). The mixed glue should be used up within 30 minutes (when the ambient temperature is lower than 10℃, the a component can be heated separately, and then mixed with the B component).
3. Gluing: Apply the mixed glue to the surface to be glued, then close it, and then tap it with a rubber hammer. Leave it at room temperature for more than 24 hours. If the temperature is too low, the curing time can be extended or heat curing (2 to 4 hours at 100°C).
4. Maintenance: complete the maintenance under the condition of above 10 ℃, and clean the surface after maintenance.
3. Product performance
1. Appearance: A component white paste; B component light yellow paste;
2. Operating temperature: -40℃→150℃;
3. Curing conditions: curing at room temperature for 1 hour, preliminary curing, and complete curing for 24 hours;
4. Bonding performance: shear strength ≥ 15 MPa
Compressive strength ≥ 16MPa
4. Transportation and storage:
Store in a cool, dry and ventilated place, avoid direct sunlight; avoid collision and inversion during transportation, and should be transported as non-dangerous goods.