Feb 22, 2021 Leave a message

ZTA Ceramic Is Used As Anti-wear Lining In Jet Mill

As an important equipment of superfine grinding, jet mill is widely used in the superfine grinding of non-metallic minerals and chemical raw materials. The upper limit of product size depends on the solid content in the mixture and is inversely proportional to the unit energy consumption. The working principle of jet mill is to have Joule-Thomson cooling effect by adiabatic expansion of compressed gas. Therefore, it is also suitable for the comminution of ultra-fine powder with low melting point and heat sensitive materials. The pulverization principle of jet mill is introduced below.

The principle of jet mill is that dry oil-free compressed air or superheated steam is ejected at high speed through the nozzle. During the high-speed movement of high-speed jet, the materials in the machine will collide, rub and squeeze against each other. The crushed materials arrive at the classification area with the air flow, and the materials meeting the fineness requirements are finally collected in the collector . If the material does not meet the requirements, it will return to the crushing chamber to continue crushing until it reaches the required fineness. Most of the material is crushed near the nozzle because of the large velocity gradient there. In the crushing chamber, the collision frequency between particles is much higher than that between particles and wall. That is to say, the main crushing function of jet mill is the collision or friction between particles.

Due to the strong repeated impact of air flow and materials, the inner wall of the air flow mill is seriously worn, which has a great impact on the output and needs to be repaired and replaced on time. In view of the bad working environment of the jet mill, Zibo Bomai Co., Ltd. designed ZTA ceramic as the anti-wear lining. ZTA ceramics is widely praised by customers for its excellent wear resistance and impact resistance.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry