Today we take you to know what color is inside the wear-resistant ceramic elbow. It can be divided into the following materials.
1、 Ceramic patch type wear-resistant elbow
What is a ceramic patch wear-resistant elbow, that is, a layer of ceramic tile is pasted inside the pipe to play a wear-resistant role. The adhesive of 1mm transition layer between ceramic tile and pipe is ceramic wear-resistant adhesive, which makes the ceramic patch firmly stick to the inner wall of elbow to prevent erosion, impact and wear. Its internal color is white. Generally, under the project cost, it is cheaper to install ceramic patches above dn400 than pipes. No matter how small the diameter is, it can't be operated manually. If you can't reach into the interior, you can't paste successfully.
2、 Sintered ceramic wear-resistant elbow
What is a sintered wear-resistant elbow, that is, 2000 degrees are formed at the moment of high-temperature ignition of alumina by centrifugal casting, so that alumina is thrown into the elbow during combustion. There are three layers inside the elbow, namely wear-resistant layer, transition layer and outer steel body. Sintered wear-resistant elbow has one disadvantage. The wear-resistant layer is only 5 thick, and the maximum diameter can only be produced to 450. However, the sintered wear-resistant elbow with the same thickness is more wear-resistant and cost-effective! Its interior colors are black and gray!
3、 Armored ceramic ring
What is an armored ceramic ring? In fact, the internal ceramics are one piece, and the inside is pasted with ceramic glue. The ceramic ring is annular, and the whole ring is installed inward in the pipe. Both sides are filled with ceramic epoxy resin glue to make the interior stick firmly. Usually this kind of ceramic is 8mm and the internal color is white.
After understanding these, you can choose the appropriate ceramic pipe on site to solve the problem of non wear resistance of elbow.





