Wear-resistant ceramic repair agent
Wear-resistant ceramic repair agent is a high-performance wear-resistant and cavitation-resistant polymer ceramic material made of wear-resistant ceramic particles and modified and toughened resin. Most of them are used to repair various worn parts and prepare wear-resistant protective coatings on the surfaces of various parts with wear and anti-cavitation requirements. It can also be used for the repair of abrasive wear or erosion wear parts with an abrasive particle diameter of less than 3mm under general load, and can be used as a pre-protective coating; it can repair pump bodies, impellers, fan casings, screw conveyors, etc. Particle loads wash away worn pipes.
Features:
1. Excellent wear resistance and corrosion resistance;
2. High bonding strength with metal substrate;
3. No flow slip phenomenon, convenient construction;
4. No precipitation and stratification;
5. Suitable for protection under wear and corrosion conditions below 150°C;
6. Resistant to hot water, acid and alkali.
usage:
1. Remove the loose material on the surface of the substrate, polish it with sandblasting, electric grinding wheel, wire brush or coarse sandpaper to improve the roughness of the repaired surface, and wipe it with acetone cleaning agent.
2. The wear-resistant ceramic repair agent is composed of two components, a and B. When using, the main agent a and the curing agent B should be fully mixed in strict accordance with the specified mixing ratio until the color is uniform and used up within the specified use time. , the remaining glue must not be reused.
3. The surface of the treated substrate should be coated with a mixed repair agent. In the process of applying the force, the stress is uniform, and the pressure is repeatedly applied to ensure that the material is in full contact with the surface of the substrate to achieve the effect. When multiple layers of glue are required, the original glue surface should be treated before gluing





