Differences between bomai plastic bag and traditional plastic bag:
1. Traditional plastic coating takes a long time and has complex operation;The use of new technology, fast construction, site construction
2. Traditional gluing causes an extreme waste of resources. Before gluing, at least 3mm grooves must be carved out on the surface of the metal roller to ensure a good bond between the roller and the rubber.Bomai only needs to polish the rolling surface smooth.
3, the traditional package is high in sulfur content, vulcanization pressure is not enough, rubber is easy to aging, not wear resistance.
Advantages of ceramic roller coating:
1. The high wear resistance of surface ceramics is applied to the driving roller of belt conveyor. The special ceramic structure and special arrangement method, as well as the special rubber structure, increase the friction coefficient between them and the belt and prevent the belt from slipping.
2, under the same load can reduce the tension of the belt, prolong the life of the belt.
3, ceramic wear resistance, so that the driving drum service life is more than ten times the original drum.
4, suitable for high wear, easy to slip and materials or surrounding environment moisture and other extreme conditions.
Let's talk about the three types of ceramic glue plates of bomai:
I. common type
1. Definition: an ordinary aluminum oxide ceramic block with a size of 20*20mm inserted into the special rubber, with particles on the surface and excellent wear resistance, can provide excellent grasping force between the driving roller and the conveyor belt.Even in extreme working conditions, such as muddy, wet, and high wear conditions, bomai ceramic coating can solve the problem and ensure the normal operation of the conveying system.
2. Features: (1) the alumina ceramic block with a content of 92% is embedded in rubber, and the rubber groove between the ceramic blocks ensures good drainage and mud discharge;
(2) good wear resistance and superior wear resistance make its life span 8-10 times that of traditional rubber under the same working environment;
(3) the bottom layer is 70 rubber, which is elastic and can well protect the conveyor belt and effectively reduce the wear between the conveyor belt and the driving wheel;
(4) the bottom rubber belt has cold vulcanized CN layer, which ACTS with SC2000 to achieve strong bonding with the surface of the roller;
(5) can be in the site construction, convenient and fast.
3. Scope of application:
(1) rubber packaging by roller in harsh working environment
(2) drive wheel
(3) transport all kinds of wet, muddy and highly abrasive materials
(4) high strength, high tension conveying system
Second, the heavy
1. Definition: based on the ordinary type of ceramic glue plate of 20mm, the heavy ceramic glue plate has a larger offset of the ceramic block in contact with the belt.This feature can provide greater driving force when the belt is under strain, especially when used in conjunction with a fabric belt with a thinner adhesive on the extended or load-bearing surface.
2. Advantages: (1) alumina ceramic block;
(2) planar single-row ceramics;
(3) high wear resistance;
(4) elastic rubber base protection belt;
(5) it can be used together with bomai bonding system to make the operation easier.
3. Application field: (1) under harsh working conditions;
(2) wet, viscous, muddy and highly abrasive materials;
(3) high tension belt;
(4) worn tail wheel;
(5) no power drum.
Three, special heavy duty
1. Definition: based on the ordinary type of ceramic glue plate of 25mm, extra-heavy ceramic glue plate is designed to provide a large grasp force. In addition to the thicker rubber substrate (allowing more deformation), extra-heavy ceramic block after 11mm is embedded into the rubber substrate, and the highly elastic rubber substrate is dynamic.Even in harsh conditions, the roller provides good driving force for high-tension belts while protecting your belts.
2. Advantages :(1) it can effectively prevent wear and impact damage under extreme working conditions;
(2) the optimized ceramics can ensure more stable product performance;
(3) long service life;
(4) easy and fast installation.
3. Application :
(1) material transfer station;
(2) vibration grinding equipment;
(3) silo lining;
(4) chute lining glue.
