Apr 24, 2020 Leave a message

Reason And Matters Needing Attention Of Zirconia Bead Easily Broken In Sanding Mill

Reason of fragile zirconium bead:

From the production process for main sintering, and fused method two kinds, such as in one of the key production stage didn't control good will appear bubble bead, snowmen, bead, tail bead, flat (ellipse) bead, the above four kinds of beads in the grinding process would easily broken, so remind you in the future choice of zirconia beads at the same time, to pay attention to the above four kind of zirconia beads.

As for the beads themselves, quality issues and the strength of the selected zirconium beads are also critical factors in the generation of zirconia bead crushing.Zirconia bead in the normal operation of the sanding machine, the zirconia bead in the sanding machine stress is negligible, so the zirconia bead crushing factors are focused on the equipment and process.

zirconia bead4

Matters needing attention:

The first thing to check is whether the contacts inside the sander are installed correctly. Loose discs or sharp edges will cause the breakage of zirconia beads. Secondly, the back pressure.The zirconia beads will be broken to a certain extent.In addition to the city of zirconia bead extrusion problem, zirconia bead accumulation in the bottom of the grinder, the speed of the working pump is too fast will lead to the zirconia bead concentration in the outlet of the grinder, which leads to the grinding bead broken.But starting the mill with an "on - off - on - off" action and loosening the backlog of beads won't do the trick.When zirconia beads from different manufacturers are put together, they will also break, because the quality of each manufacturer is different, so the breakage rate of zirconia beads will be doubled.



Send Inquiry

whatsapp

Phone

E-mail

Inquiry