Professional term for alumina ball stone
①Pressed balls: wear-resistant alumina balls formed by cold isostatic pressing.
②Rolling ball: wear-resistant alumina ball formed by rolling
③Brim: The forming marks formed on the surface of the sphere during the cold isostatic pressing of the wear-resistant alumina ball.
④Radial size: the diameter of the ball measured parallel to the direction of the ball cap.
⑤ Weft dimension: the diameter of the ball measured perpendicular to the direction of the ball cap.
⑥Sphericity: the ratio of the difference between the radial size and the latitudinal size of the pressed ball to the specification size.
⑦ Wear: The weight loss of the wear-resistant alumina ball after adding water to the polyurethane tank and grinding for a certain period of time.
Classification
① According to the forming method: pressed ball, rolling ball, cylindrical ball
② According to the size, it is divided into: large ball ≧ 20mm, small ball < 20mm.
③ According to the alumina content, it is divided into: 75 series, 90 series, 92 series, 95 series, etc.
What are the commonly used specifications of alumina balls?
① Ball rolling: Φ0.5, Φ1.0, Φ2, Φ3, Φ6, Φ8, Φ10, Φ13, Φ20, Φ25
②Press ball: Φ30, Φ40, Φ50, Φ60, Φ70, Φ80, Φ90
③Cylinder ball: Φ20×20, Φ25×25, Φ30×30, Φ40×40, Φ50×50, Φ60×60





