Introduction:
Ceramic adhesive is also called: epoxy resin adhesive, wear-resistant adhesive, wear-resistant ceramic adhesive, ceramic adhesive. The main function is to stick the industrial alumina ceramic firmly to the inner wall of the equipments.
Ceramic adhesive has the characteristics of acid and alkali resistance, strong adhesion, aging resistance, shock resistance, impact resistance and waterproof.It is suitable for bonding ceramic and metal surface.
Next: Let's introduce how to use ceramic glue.
First of all, remove the oil and rust on the metal surface to make it clean.
Mix part A and part B together to one color in proportion.Mix a little at a time, but mix more frequently.
Apply the ceramic glue to the metal surface and then paste the ceramic.
There are a few special considerations:
1.When the temperature is lower than 20 ℃, the curing time will be prolonged. If conditions permit, it is recommended to increase the temperature to 60 ℃.
2.In case of eye contact, please rinse by abundant clean water and go to see a doctor.
