How to install the ceramic tube in the integrally formed wear-resistant ceramic lined pipe
The integrally formed wear-resistant ceramic tube is mainly used in special industries such as lithium batteries, because the lithium battery industry needs to isolate metal pollution during material transportation, and the wear resistance and insulation of the proposed wear-resistant ceramic ring have become the best choice for the lithium battery industry . So how should the wear-resistant ceramic ring be installed? It mainly includes the following three steps.
(1) Porcelain ring splicing: The porcelain rings that have passed the inspection are spliced with 502 quick-drying glue according to the requirements of the drawings to ensure that the interior is flat and there are no large gaps.
(2) Porcelain ring paste: the flanges on both sides of the pipe are wrapped with kraft paper, and the glue is glued in the pipe with the adjusted adhesive to ensure that it is even, and then the glue is glued on the spliced porcelain ring pipe to ensure that the pipe is intact once Sexually stick to the inner wall of the pipe. After fixing, check whether there is misalignment and glue leakage on the inner wall of the pipe, and place the pasted pipe in the designated position after checking. The ceramic paste should be operated in strict accordance with the drawings, and the ceramic ring should be properly dislocated when pasting the ceramic ring to ensure the service life of the pipeline.
(3) Grinding: After the adhesive is completely cured, the redundant ceramic rings on both sides of the pipe should be polished to ensure that they are flat and cannot damage the flange. After the grinding is completed, remove the kraft paper at both ends.
