How to choose alumina wear-resistant ceramics?
Wear-resistant ceramics are special corundum ceramics made of Al2O3 as the main raw material, rare metal oxides as flux, and fired at a high temperature of 1700 degrees, and then combined with special rubber and high-strength organic/inorganic binders. The product.
Now alumina wear-resistant ceramics have spread all over the market and are widely used in steel, coal, thermal power, cement, smelting and other industries. So how to choose wear-resistant ceramics?
1. The hardness of wear-resistant ceramics
Generally used in various equipment, people choose more wear-resistant ceramic sheets, which are directly attached to the surface of the equipment to protect the equipment from wear and tear. Due to the small size of the ceramic sheet, it can be flexibly applied to various shapes of equipment. Ceramics with different hardness are used for different equipment, which should be determined according to the working conditions.
2. Wear resistance
In special working conditions, more wear-resistant ceramics are required, such as ZTA toughened alumina ceramics. ZTA toughened alumina ceramics is based on the addition of certain zirconia ceramic ingredients on the basis of alumina. The wear resistance and toughness are between alumina ceramics and zirconia ceramics. ZTA ceramics have better wear resistance than 95% alumina ceramics. it is good.
3. Working temperature
Secondly, the working temperature of the equipment must be considered, which determines the choice of the installation method of wear-resistant ceramics to ensure that the wear-resistant ceramics can not fall off under high temperature conditions. If it is a bulk material transportation, it is also necessary to evaluate the impact strength based on factors such as material properties, particle size, drop, erosion angle, etc., to ensure the selection of suitable wear-resistant ceramics.






