Wear resistant ceramic fan impeller refers to the Al2O3 ceramic plate pasted on the outlet of fan impeller and the connection part between blade and rear plate to improve wear resistance. On the basis of traditional fan manufacturing technology, a surface layer with excellent wear-resistant performance is formed on the main working surface of fan equipment by sticking ceramic wear-resistant lining technology, which can increase the wear-resistant service life of fan impeller by more than three times and the fan efficiency by about 10-30%.
The impeller of wear-resistant ceramic fan is suitable for the conditions of power plant, such as power plant, power plant, coking plant, cement plant, steel plant blast furnace fan, sintering fan, circulating fan and other conveying hard particles and corrosive media.
The characteristics of Bomai wear-resistant ceramic lining: 1. The hardness of large Rockwell is hra80-90, the hardness is next to diamond. 2. The excellent wear resistance is 266 times that of manganese steel and 171.5 times that of high chromium cast iron. 3. The light weight density is 3.6g/cm3, only half of the steel, which can greatly reduce the equipment load. 4. Convenient construction
The advantages of using wear-resistant ceramic sheet for fan impeller are as follows: 1. High hardness and wear-resistant, improving service life: due to the hardness of wear-resistant ceramic sheet hra80-88 (92% - 95% porcelain) used on the working surface of fan impeller, its particle erosion and wear resistance is more than 5 times of the conventional processing methods such as spray welding and alloy powder block welding, and more than 100 times higher than 16Mn steel.
2. Safe and reliable operation with high efficiency: according to different ceramic construction processes, the temperature resistance can reach 450 ℃. Moreover, the wear-resistant ceramic lining has good toughness and can adapt to high temperature and vibration conditions. It can operate for more than 7 years under the condition of 90-160 ℃. There are few accidents that lead to unplanned shutdown of the fan due to ceramic falling off, and the wear problem is not considered, especially the weight of the fan impeller is greatly reduced, so the operation efficiency of the fan is greatly improved, the maintenance time is reduced, and the maintenance time is improved Economic benefits.
The maintenance is simple and convenient: the construction is simple, which can quickly and timely repair the abnormal ceramic falling off and abnormal local wear in the operation process. At the same time, it will not input heat to the impeller, prevent the deformation of the impeller, and ensure that the impeller and accessories are put into operation in time.
Service life: the service life of wear-resistant ceramic fan impeller is related to the size, concentration, speed and scouring angle of dust particles. The smaller the particles, the lower the concentration, the lower the scouring speed and the smaller the scouring angle, the longer the service life of wear-resistant fan impeller.
Zibo Bomai ceramic materials Co., Ltd. provides customers with system solutions and on-site construction services to solve wear and corrosion problems. The company adheres to the concept of "integrity, diligence, science, innovation and professionalism", and strives for survival and development in cooperation with all people of insight in innovation.





