The cylinder mixing machine of sintering machine system has a high failure rate due to the unreasonable lining structure and the serious adhesive material in the cylinder, which leads to the excessive load of the cylinder body and causes the tire group to burst frequently, the retaining ring, and the frequent shutdown. As a result, the equipment failure rate of the cylinder mixing machine is high, which affects the production capacity of the sintering machine.Customer through the test, effect analysis and comparison of each material lining board, decided to choose wear-resistant ceramic lining board to solve this problem.
Wear-resisting ceramics in composite lining board wear-resisting ceramics is alumina powder as the main raw material, the rare metal oxide as the solvent, the high temperature roasting, and then separately in the special rubber and glue them into a high strength and organic matter, good wear resistance and impact resistance, light weight, wear-resistant ceramic composite plate with heat resistant organic adhesive paste in polished on the inner wall of the cylinder, the cylinder barrel load can be reduced, improve the service life of the tire group and other components in more than five years, increased the effective diameter of cylinder mixer, improve the ability of blending pelletizing.In addition, wear-resistant ceramic composite liner board has a simple structure, easy to replace and other characteristics.
The advantages of installing wear-resistant ceramic composite lining board on the first and second cylinder mixing machine are obvious. The following points are summarized:
1. Reduced equipment downtime and material cleaning time, improved the use efficiency of sintering machine, can achieve the purpose of increasing production.
2. Reduced the consumption of spare parts and saved the cost of spare parts;
3. It reduces the daily labor intensity of the production system before maintenance, eliminates the need for cleaning and mixing machine, and greatly reduces the equipment maintenance workload of maintenance personnel;
4. The service life of wear-resistant ceramic composite liner is extended at least 5 times, saving the replacement cost;
5. Light weight, thin thickness and non-stick material not only reduce the load of the cylinder and improve the equipment efficiency, but also increase the effective diameter of the cylinder and improve the mixing effect of pelletizing.
6. Directly bonded to the barrel body by organic binder, which can effectively prevent corrosion and wear of the equipment.





